GB/T 32936-2016Methods of assessing lightning protection within explosion (English PDF)
爆炸危险场所雷击风险评价方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32936-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32936-2016 is the English-translated version of 爆炸危险场所雷击风险评价方法.
GB/T 32936-2016 is the Chinese standard "Methods of assessing lightning protection within explosion". Its scope clause reads: This standard specifies the identification, calculation and evaluation of lightning risk in explosion hazard locations.
This standard applies to the production, processing, processing, storage of dangerous places of dangerous lightning risk assessment. Its clauses include normative reference documents; lightning risk identification.
Found what you need?
Document preview — GB/T 32936-2016
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 Lightning risk identification
- 3.1 Evaluation unit division
1 Scope
This standard specifies the identification, calculation and evaluation of lightning risk in explosion hazard locations.
This standard applies to the production, processing, processing, storage of dangerous places of dangerous lightning risk assessment.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Lightning protection - Part 2. Risk management GB/T 21714.2-2008
GB/T 21714.3-2008 Lightning protection - Part 3. Physical damage and life hazard of buildings
Lightning protection - Part 4. Electrical and electronic systems in buildings GB/T 21714.4-2008
Code for design of lightning protection for buildings GB 50057
3 Lightning risk identification
3.1 Evaluation unit division
Should be based on the explosion of dangerous places where the explosion of the characteristics of the explosion, the location of the explosion and dangerous places after the explosion will cause it
The explosion of his facility is divided into multiple evaluation units by the following requirements.
- an electrical, electronic equipment suffered lightning, causing malfunctions may lead to secondary explosive accident, divided into an evaluation unit;
--- Lightning hit an explosion hazard object explosion may cause other isolated units occur when the explosion, divided into an evaluation list
For the concept of martyrdom, see Appendix A;
--- use of pipes, channel segments connected together equipment (or tank), should be divided into a unit.
The evaluation unit is shown in Table 1, and the evaluation unit is shown in Appendix B.
Table 1 List of evaluation units
Schematic explanation
Equipment 1 in the event of lightning strikes, will cause the device 2 occurred martyrdom, at this time two
The equipment should be classified as an evaluation unit
Equipment 1 and equipment 2 through a certain path to connect each other to transfer explosive substances or energy
Quantity, when the equipment 1 explosion occurred after the explosion, the explosive energy will be delivered to the device 2, and
So that the occurrence of blasting accident, this time the two equipment should be classified as an evaluation unit
Equipment 1 and equipment 2 of the explosion risk is through a certain electrical, electronic system control
System, then electrical, electronic system after lightning failure, may lead to equipment 1
Or equipment 2 explosion risk can not control, then the two devices and control system
The building of the building shall be classified as an evaluation unit […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32936-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32936-2016
$135.00