Valid

GB/T 32872-2016Screening specifications for illumination LEDs in space sciences (English PDF)

空间科学照明用LED筛选规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32872-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 29, 2016

Implementation date

November 1, 2016

Scope

GB/T 32872-2016 is the English-translated version of 空间科学照明用LED筛选规范.

GB/T 32872-2016 is the Chinese standard "Screening specifications for illumination LEDs in space sciences". Its scope clause reads: This standard specifies the space science lighting LED (LightEmittingDiode) screening projects and procedures, screening methods, parameter measurement And qualified to determine.

This standard applies to space science lighting with a rated power of 1W and 1W above the package of single-core LED screening, other power levels The LED can also refer to the implementation.

Its clauses include normative reference documents; general; screening items and procedures.

Found what you need?

Document preview — GB/T 32872-2016

National Standard of the People's Republic of China

ICS
31.080
Classification
L 53

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 4 Screening items and procedures
  • 5 screening method
  • 5.1 appearance inspection
  • 5.2 Parameter measurement
  • 5.3 constant acceleration
  • 5.4 Particle collision noise detection
  • 5.5 Sealability check
  • 5.6 high temperature storage
  • 5.7 Temperature impact
  • 5.8 low temperature start
  • 5.9 Temperature cycle
  • 5.10 old refining
  • 5.11 Final test
  • 6 Parameter measurement and conformity judgment
  • 6.1 Measurement conditions
  • 6.2 Test parameters
  • 6.3 Test Method
  • 6.4 Qualified judgment
  • Appendix A (informative appendix) statistics for LED sciences for space science lighting

1 Scope

This standard specifies the space science lighting LED (LightEmittingDiode) screening projects and procedures, screening methods, parameter measurement

And qualified to determine.

This standard applies to space science lighting with a rated power of 1W and 1W above the package of single-core LED screening, other power levels

The LED can also refer to the implementation.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Test methods for LED modules for general lighting applications GB/T 24824-2009

Standard Test Method for Semiconductor Discrete Devices - GJB128A -.1997

Non - destructive physical analysis of military electronic components GJB4027

3 General

3.1

Screened devices should be based on product specifications or technical requirements of the parameters of the initial measurement, qualified devices can participate in screening. Screening according to regulations

Of the items and procedures to complete each item after the removal of substandard products.

3.2

The filtered devices shall be numbered consecutively and the test data shall be recorded at each test. After screening, you should write a filter table, format parameters

See Appendix A, Device Parameter Test Data can be used as an attachment to the screening report.

3.3

If the test is abnormal, the time of occurrence of the exception and the device number should be recorded.

3.4

When the screening rejection rate exceeds 20%, the batch should be rejected. When the function fails, should be in accordance with the GJB4027 failure points

Analysis, such as non-accidental failure of material or process factors shall be subject to batch failure.

4 Screening items and procedures

Screening according to the items and procedures specified in Table 1, after the completion of each project, remove the substandard products.

Table 1 Screening items and procedures

Filtering item filtering method

1 See Chapter 5.1 for visual inspection

2 Parameter measurement See 5.2

3 constant acceleration See 5.3

4 Particle Collision Noise Detection (PIND) See 5.4

5 See Chapter 5.5 for sealing performance

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32872-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32872-2016

$145.00