GB/T 32864-2016Code for geological investigation of landslide prevention (English PDF)
滑坡防治工程勘查规范
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32864-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32864-2016 is the English-translated version of 滑坡防治工程勘查规范.
GB/T 32864-2016 is the Chinese standard "Code for geological investigation of landslide prevention".
Its scope clause reads: This standard stipulates the landslide prevention and control project classification, landslide survey, the feasibility of the preliminary stage of exploration, the design stage of detailed exploration and facilities The stage of additional exploration requirements, the main survey methods, physical mechanics test and stability analysis and so on.
This standard applies to landslide prevention and control works. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32864-2016
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- P 13
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 General
- 7 Landslide survey
- 8 Preliminary exploration phase
- 9 detailed investigation phase
- 11 Completed geological report
- 13 Physical mechanics test and stability analysis
- Appendix A (informative) Slope movement classification
- Appendix B (Normative Appendix) Landslide Classification
- Appendix C (informative) Summary of geophysical exploration and testing methods and scope of application
- Appendix D (informative) Technical application of landslide monitoring
1 Scope
This standard stipulates the landslide prevention and control project classification, landslide survey, the feasibility of the preliminary stage of exploration, the design stage of detailed exploration and facilities
The stage of additional exploration requirements, the main survey methods, physical mechanics test and stability analysis and so on.
This standard applies to landslide prevention and control works.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Code for engineering survey GB 50026
GB/T 50123 Geotechnical test method standard
Standard for test methods for rock mass GB/T 50266 engineering
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Landslide
Under the action of gravity, along the geological weak surface sliding outward out of the geological body and accumulation body.
3.2 Sliding plane
Landslide sliding and accumulation in the process of the bottom of the interface, including sliding out of the process of forming the sliding surface and over the accumulation process of the formation of the slide
Cover.
3.3 Slip sliding body
Sliding along the sliding surface of the cut off the geological body and along the slip surface overlying accumulation of the formation of sliding accumulation.
3.4 Slippery landslidebed
Located in the sliding surface is relatively stable under the rock (soil) body.
3.5 Slope naturalslope
A natural slope formed by various geological processes, such as slopes, coasts, riverside, and so on.
3.6 Unstable ramps
With the creep, bulging, cracking and other deformation characteristics and deformation of the slope is not obvious slope.
3.7 Landslide prevention and control project
For landslide prevention and control works on the landslide area survey, mapping, exploration and other means of geological work, and the preparation of the activities of the investigation documents.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32864-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32864-2016
$355.00