GB/T 32856-2016General specifications for high-voltage electrical energy meters (English PDF)
高压电能表通用技术要求
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32856-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32856-2016 is the English-translated version of 高压电能表通用技术要求.
GB/T 32856-2016 is the Chinese standard "General specifications for high-voltage electrical energy meters".
Its scope clause reads: This standard specifies the high voltage side energy meter (below) for measuring the voltage of 6kV ~ 35kV and frequency 50Hz in the power network The terms and definitions of electrical parameters, electrical engineering standard values, mechanical structure requirements, environmental conditions, electrical requirements, accuracy requirements, use And storage and reliability requirements, inspection rules.
This standard applies to newly manufactured high voltage watt-hour meters and is only applicable to its type tests. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 32856-2016
National Standard of the People's Republic of China
- ICS
- 17.220.20
- Classification
- N 22
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 electrical parameter standard value
- 4.1 Rated voltage standard value (Un)
- 4.2 Rated current standard value (In)
- 4.3 Rated current magnification Standard value (Kb)
- 4.4 Rated frequency (fn)
- 4.5 Meter constant rating
- 4.6 rated voltage factor standard value
- 5 mechanical structure requirements
- 5.1 General mechanical requirements
- 5.2 Insulation surface
- 5.3 shell and window
- 5.4 Terminals
- 5.5 Nameplate
- 5.6 Packing
- 6 Environmental conditions
- 6.1 Altitude
- 6.2 Ambient temperature
- 6.3 Ambient humidity
- 6.4 salt spray
- 6.5 solar radiation
- 6.6 Storage and Transportation
- 7 Electrical requirements
- 7.1 Power consumption
- 7.2 Self-heat impact test
- 7.3 AC withstand voltage
- 7.4 Impulse withstand voltage
- 7.5 partial discharge
- 7.6 Single-phase grounding operation test
- 7.7 Short voltage interrupt test
- 7.9 Radio disturbance suppression test
- 8 Accuracy requirements
- 8.1 Accuracy test conditions
- 8.2 Error limits caused by current changes
- 8.3 Error limits caused by other effects
- 8.4 start and dive
- 8.5 Instrument constant test
- 8.6 Electricity meter test
- 9 use and storage life and reliability requirements
- 9.1 Use and storage life
- 9.2 Reliability requirements
- 10.1 Inspection Classification
- 10.2 Factory test
- 10.3 Type Test
- 10.4 cycle test
- 10.5 Reliability Verification Test
- Appendix A (informative) High pressure drawing test circuit Figure
- Appendix B (informative) Interval of the test circuit Figure
- Appendix C (informative) Reliability Verification Test Statistics and Reliability Parameter Estimates
1 Scope
This standard specifies the high voltage side energy meter (below) for measuring the voltage of 6kV ~ 35kV and frequency 50Hz in the power network
The terms and definitions of electrical parameters, electrical engineering standard values, mechanical structure requirements, environmental conditions, electrical requirements, accuracy requirements, use
And storage and reliability requirements, inspection rules.
This standard applies to newly manufactured high voltage watt-hour meters and is only applicable to its type tests.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191-2008 packaging and storage icon
GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature (IEC 60068-2-
1..2007, IDT)
GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature (IEC 60068-2-
2..2007, IDT)
GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db. alternating damp heat (12 h
12h cycle) (IEC 60068-2-30..2005, IDT)
GB/T 2423.6-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Eb and guidance. Collisions (IEC 60068-2-29. 1987, IDT)
GB/T 2423.7-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ec and guidance.
Inverted (mainly for equipment type samples) (IEC 60068-2-31. 1982, IDT)
GB/T 2423.8-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ed. Free fall (IEC 60068-2-32..1990, IDT)
GB/T 2423.17-2008 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist (IEC 60068-
2-11. 1981, IDT)
GB/T 2423.24-2013 Environmental tests - Part 2. Test methods - Test Sa. Simulated solar radiation on the ground and its test
Guidance (IEC 60068-2-5..2010, IDT)
GB/T 2829-2002 Periodic inspection count Sampling procedures and tables (for inspection of process stability)
GB 4208-2008 enclosure protection class (IP code) (IEC 60529..2001, IDT)
GB/T 4796-2008 Classification of environmental conditions for electric and electronic products - Part 1. Environmental parameters and severity (IEC 60721-
1..2002, IDT)
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flame 50W Horizontal and vertical fire
Flame test method (IEC 60695-11-10..2003, IDT)
GB/T 7354-2003 Partial discharge measurement (IEC 60270..2000, IDT)
GB 9254-2008 Radio disturbance limits and measurement methods for information technology equipment (CISPR22..2006, IDT)
Test instrument for energy meter GB/T 11150-2001 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32856-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32856-2016
$535.00