Valid

GB/T 32816-2016Silicon-based MEMS fabrication technology—Specification for criterion of the combination of the deep etching and bonding process (English PDF)

硅基MEMS制造技术 以深刻蚀与键合为核心的工艺集成规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32816-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 29, 2016

Implementation date

March 1, 2017

Scope

GB/T 32816-2016 is the English-translated version of 硅基MEMS制造技术 以深刻蚀与键合为核心的工艺集成规范.

GB/T 32816-2016 is the Chinese standard "Silicon-based MEMS fabrication technology—Specification for criterion of the combination of the deep etching and bonding process".

Its scope clause reads: This standard specifies the process requirements for the processing of MEMS devices using process integration with deep etch and bonding as the core, and quality inspection requirements.

This standard is applicable to machining and quality inspection based on process integration with deep etch and bonding as the core. Its clauses include normative reference documents; terms and definitions; process flow.

Found what you need?

Document preview — GB/T 32816-2016

National Standard of the People's Republic of China

ICS
31.200
Classification
L 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 Terms and definitions
  • 4 Process
  • 4.1 Overview
  • 4.2 wafer selection
  • 4.3 Bonded area preparation
  • 4.4 Preparation of glass sheet metal electrode
  • 4.5 silicon - glass anode bonding
  • 4.6 deep etching structure release
  • 5 process safety requirements
  • 5.1 Personnel requirements
  • 5.2 Environmental requirements
  • 5.3 Equipment requirements
  • 6 Raw material requirements
  • 7.1 Security
  • 7.2 Chemical Reagent
  • 7.3 emissions
  • 8 test
  • 8.1 General principles
  • 8.2 Drying of silicon wafers The process of releasing critical processes
  • 8.3 Final inspection

1 Scope

This standard specifies the process requirements for the processing of MEMS devices using process integration with deep etch and bonding as the core.

And quality inspection requirements.

This standard is applicable to machining and quality inspection based on process integration with deep etch and bonding as the core.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 19022 measurement management system measurement process and measuring equipment requirements

GB/T 26111 terminology for microelectromechanical systems (MEMS)

Code for design of clean building of GB 50073

3 terms and definitions

GB/T 26111 Definitions of terms and definitions apply to this document.

4 process flow

4.1 Overview

The process integration with deep etch and bonding as the core includes wafer bonding area preparation, glass sheet metal electrode preparation, silicon-glass anode bonding,

Deep etching structure release, scribe and other parts, of which the key process with (G) said.

4.2 Wafer selection

4.2.1

Selection of silicon material, such as n-type or p-type, lightly doped or heavily doped, resistivity, etc., should be combined with the performance requirements of the device

And follow-up process needs to determine.

4.2.2

The choice of silicon crystal face should be based on the subsequent process selection. Potassium hydroxide (KOH) or tetrakis are used in the subsequent process steps

Methyl ammonium hydroxide (TMAH) corrosion, should use (100) crystal face of the silicon.

4.3 Bonded area preparation

4.3.1 Overview

According to the design requirements of the wafer bonding area can be used to prepare a variety of methods, respectively, dry etching and wet etching.

4.3.2 Dry etching preparation

The use of reactive ion etching, the formation of bonding anchor, including photolithography, dry etching, ion implantation, annealing and other processes, as shown in Figure 1 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32816-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32816-2016

$235.00