Valid

GB/T 32815-2016Silicon-based MEMS fabrication technology - Specification for criterion of the bulk silicon piezoresistance process (English PDF)

硅基MEMS制造技术 体硅压阻加工工艺规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32815-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 29, 2016

Implementation date

March 1, 2017

Scope

GB/T 32815-2016 is the English-translated version of 硅基MEMS制造技术 体硅压阻加工工艺规范.

GB/T 32815-2016 is the Chinese standard "Silicon-based MEMS fabrication technology - Specification for criterion of the bulk silicon piezoresistance process". Its scope clause reads: This standard specifies the process requirements and quality inspection requirements for the processing of MEMS devices using bulk silicon piezoresistive processes.

This standard applies to silicon-based MEMS manufacturing technology based on back cavity corrosion and silicon - glass bonding of the bulk silicon piezoresistive processing technology processing and Quality inspection.

Its clauses include normative reference documents; terms and definitions; process flow.

Found what you need?

Document preview — GB/T 32815-2016

National Standard of the People's Republic of China

ICS
31.200
Classification
L 55

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 Terms and definitions
  • 4 Process
  • 4.1 Overview
  • 4.2 wafer selection
  • 4.3 Preparation of silicon die presses
  • 4.4 Preparation of silicon wafer isolation area
  • 4.5 silicon wafer back cavity corrosion
  • 4.6 Preparation of silicon wafers (G)
  • 4.7 glass plate metal electrode preparation
  • 4.8 silicon - glass bonding
  • 4.9 Bonded sheet silicon surface etching
  • 5 process safety requirements
  • 5.1 Personnel requirements
  • 5.2 Environmental requirements
  • 5.3 Equipment requirements
  • 7.1 Safety of electricity
  • 7.2 Chemical reagents
  • 7.3 Emissions
  • 8 Test
  • 8.1 General
  • 8.2 Inspection methods and requirements

1 Scope

This standard specifies the process requirements and quality inspection requirements for the processing of MEMS devices using bulk silicon piezoresistive processes.

This standard applies to silicon-based MEMS manufacturing technology based on back cavity corrosion and silicon - glass bonding of the bulk silicon piezoresistive processing technology processing and

Quality inspection.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 19022 measurement management system measurement process and measuring equipment requirements

GB/T 26111 terminology for microelectromechanical systems (MEMS)

Code for design of clean building of GB 50073

3 terms and definitions

GB/T 26111 Definitions of terms and definitions apply to this document.

4 process flow

4.1 Overview

The bulk silicon piezoresistive process includes the preparation of silicon die-pressing zone, wafer isolation zone preparation, silicon wafer back cavity etching, wafer lead preparation, glass sheet

The preparation of silicon - glass bonding and bonding silicon surface etching and other parts, of which the key process with (G) said.

4.2 Wafer selection

4.2.1

The choice of silicon material should be determined in conjunction with the performance requirements of the manufactured device and the subsequent process requirements, such as n-type, light doping, resistivity

For 2ohmcm and so on.

4.2.2

The choice of silicon crystal face should be based on the subsequent process selection. Potassium hydroxide (KOH) or tetrakis are used in the subsequent process steps

When the methyl ammonium hydroxide (TMAH) is used to etch the wafer back cavity, a silicon wafer of (100) crystal face should be used.

4.3 Preparation of silicon wafer piezoresistive area

Wafer pressure zone preparation shown in Figure 1, including cleaning, lithography, ion implantation, impurity atomic diffusion, impurity atomic propulsion processes, specific

Including the following steps.

a) wafer preparation, and do the necessary cleaning;

b) Preparation of silica on the surface of the silicon wafer by thermal oxidation;

c) silicon photolithography, the formation of light boron injection area graphics;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32815-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32815-2016

$355.00