GB/T 32814-2016Silicon-based MEMS fabrication technology—Specification for criterion of the SOI wafer based MEMS process (English PDF)
硅基MEMS制造技术 基于SOI硅片的MEMS工艺规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32814-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32814-2016 is the English-translated version of 硅基MEMS制造技术 基于SOI硅片的MEMS工艺规范.
GB/T 32814-2016 is the Chinese standard "Silicon-based MEMS fabrication technology—Specification for criterion of the SOI wafer based MEMS process". Its scope clause reads: This standard specifies the process requirements and quality inspection requirements that should be followed when processing MEMS devices using SOI wafers.
This standard is applicable to the processing and quality inspection of silicon devices based on SOI wafers in silicon-based MEMS manufacturing technology. Its clauses include normative reference documents; terms and definitions; process flow.
Found what you need?
Document preview — GB/T 32814-2016
National Standard of the People's Republic of China
- ICS
- 31.200
- Classification
- L 55
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Process
- 4.1 Overview
- 4.2 wafer cleaning
- 4.3 Preparation of the mask
- 4.4 Dry etching
- 4.5 Structure Release
- 4.6 wafers to mask
- 5 process processing capacity
- 5.1 Process capability requirements
- 5.2 Process stability requirements
- 6 process requirements
- 6.1 Personnel requirements
- 6.2 Environmental requirements
- 6.3 Equipment requirements
- 7 Requirements for raw materials and auxiliary materials
- 8 Safety and Environmental Requirements
- 8.1 Security
- 8.2 Chemical reagents
- 8.3 Emissions
- 9 test
- 9.1 General
- 9.2 Critical Process Inspection
- 9.3 Final inspection
1 Scope
This standard specifies the process requirements and quality inspection requirements that should be followed when processing MEMS devices using SOI wafers.
This standard is applicable to the processing and quality inspection of silicon devices based on SOI wafers in silicon-based MEMS manufacturing technology.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 26111 terminology for microelectromechanical systems (MEMS)
Code for design of clean building of GB 50073
3 terms and definitions
GB/T 26111 Definitions and the following terms and definitions apply to this document.
3.1 Silicon on the insulator on the insulator; SOI
In the middle of the two layers of silicon to introduce a layer of oxide layer, forming a "silicon - silica - silicon" sandwich structure of the technology. Which top silicon said
For the device layer (devicelayer), the underlying silicon is called the substrate layer (handlelayer), the silicon dioxide layer is called buried layer (buriedlayer).
Note. The current techniques for preparing SOI wafers include separation of implantation of oxygen (SIMOX) technology, silicon bonding and backside thinning (bondingSOI, BSOI) technology and the combination of bonding and injection of intelligent stripping (smartcut) technology.
3.2 Release releasing
So that the movable part of the MEMS structure and the rest of the separation, so that the process of moving.
3.3
Deep Reactive Ion Etching Deepreactivelonetching;
A reactive ion etching method with a high aspect ratio, typically using an inductively coupled plasma (inductivelycoupled plasma,
ICP) etching, sometimes referred to as ICP etching.
3.4 footing effect
SOI silicon wafer in the deep reactive ion etching process, when the etching to reach the buried layer, the occurrence of lateral etching phenomenon.
4 process flow
4.1 Overview
MEMS processes based on SOI wafers include mask preparation, dry etching, structural release, etc., as shown in Figure 1, where
The key process is represented by (G).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32814-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32814-2016
$205.00