Valid

GB/T 32746-2016General specification of signals and interfaces for geotechnical engineering instruments (English PDF)

岩土工程仪器信号与接口

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32746-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 14, 2016

Implementation date

January 1, 2017

Scope

GB/T 32746-2016 is the English-translated version of 岩土工程仪器信号与接口.

GB/T 32746-2016 is the Chinese standard "General specification of signals and interfaces for geotechnical engineering instruments".

Its scope clause reads: This standard specifies the geotechnical instrumentation in the sensor and display, recording instruments or monitoring/monitoring, data transmission equipment, and geotechnical engineering The terms and definitions of the signals and interfaces between the instrument and the automation system equipment, classification, requirements, test conditions and methods.

This standard applies to a variety of geotechnical instruments with a signal input and output sensors, display and record instruments or monitoring/monitoring, the number Transmission equipment and automation systems and equipment. Its clauses include normative reference documents; terms and definitions.

Found what you need?

Document preview — GB/T 32746-2016

National Standard of the People's Republic of China

ICS
07.060
Classification
P 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 4.1 Product classification2
  • 4.2 Signal classification2
  • 4.3 Interface classification2
  • 5 request2
  • 5.1 General technical requirements2
  • 5.2 sensor signal and interface3
  • 5.3 display, record the instrument or monitor/monitor, digital transmission equipment signal and interface3
  • 6 Test conditions and methods4
  • 6.1 General provisions4
  • 6.2 Test conditions4
  • 6.3 Test method4

1 Scope

This standard specifies the geotechnical instrumentation in the sensor and display, recording instruments or monitoring/monitoring, data transmission equipment, and geotechnical engineering

The terms and definitions of the signals and interfaces between the instrument and the automation system equipment, classification, requirements, test conditions and methods.

This standard applies to a variety of geotechnical instruments with a signal input and output sensors, display and record instruments or monitoring/monitoring, the number

Transmission equipment and automation systems and equipment.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 3408.1-2008 Strain gauges for dam monitoring equipment - Part 1. Differential resistance strain gauges

Basic terminology of instrumentation GB/T 13983

Basic parameters of geotechnical engineering equipment and general technical conditions GB/T 15406-2007

Specification for series of geotechnical engineering instruments GB/T Requirements and methods for basic environmental testing of geotechnical engineering equipment GB/T 24105-2009

GB/T 24106 Terminology and symbols for geotechnical engineering instruments

3 terms and definitions

GB/T 13983, GB/T 24106 Definitions and the following terms and definitions apply to this document.

3.1 Information

Geotechnical engineering equipment to measure or monitor the geotechnical, dam and rock and other geotechnical engineering data and the operation of the various instructions.

3.2 Signal

Geotechnical instrumentation between the sensor and display, recording or data transmission equipment and between geotechnical equipment and automation systems equipment phase

Exchange of various information.

3.3 Interface

Geotechnical instrumentation between the sensor and display, recording or data transmission equipment and between geotechnical equipment and automation systems equipment phase

Interchange the information of the hardware and software.

3.4 Analogue sensor

A device or device capable of converting a measured physical quantity into an analog electrical signal.

Note. usually consists of sensitive components and conversion components.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32746-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32746-2016

$105.00