GB/T 32706-2016Safety requirements for laboratory instruments and equipment—Noise measuring instruments (English PDF)
实验室仪器和设备安全规范 噪声测量仪器
This is a limited preview
Buy now to download the full PDF (57 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32706-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 14, 2016
Implementation date
January 1, 2017
Scope
GB/T 32706-2016 is the English-translated version of 实验室仪器和设备安全规范 噪声测量仪器.
GB/T 32706-2016 is the Chinese standard "Safety requirements for laboratory instruments and equipment—Noise measuring instruments". Its scope clause reads: This standard specifies the effects of electric shock and electrical burns, mechanical hazards, flame spread from the device, excessive temperature, liquid and liquid pressure.
Impact, including the laser source, sound pressure and ultrasonic pressure, the release of gas, explosion and implosion safety requirements.
This standard applies to noise measuring instruments and equipment; measured electroacoustic transducers; noise measurement, analysis, calculation, indication and/or recording Equipment; noise measurement related non-measuring equipment such as signal generator, measuring standard, power supply; composition of noise measuring instrument part or design A computer, a processor, etc. that are used only with a noise measuring instrument; an accessory for improving the electrical and acoustic performance of a noise measuring instrument.
This standard does not include the reliability, performance or other characteristics of the equipment independent of safety, the validity of the transport package, the electromagnetic compatibility (EMC) requirements, protective measures for the protection of the environment, maintenance (repair), maintenance (repair) personnel protection. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 32706-2016
National Standard of the People's Republic of China
- ICS
- 17.140
- Classification
- N 65
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Test
- 5 logo and document
- 6 anti-shock
- 7 Anti-mechanical hazard
- 8 Resistance to mechanical shock and impact
- 9 to prevent the spread of flame
- 10 Equipment temperature limits and heat resistance
- 11 Risk of liquid protection
- 12 Radiation protection (including laser source), sound pressure and ultrasonic pressure
- 13 Protection against release of gas, explosion and implosion
- 14 components
- Appendix A (normative) Routine test
- Appendix B (normative) Measuring circuit for contact current
- Appendix C (normative appendix) Components that specify insulation requirements
- Appendix D (normative) Measurement of electrical clearance and creepage distances
- Appendix E (normative) Reduced pollution levels
1 Scope
This standard specifies the effects of electric shock and electrical burns, mechanical hazards, flame spread from the device, excessive temperature, liquid and liquid pressure.
Impact, including the laser source, sound pressure and ultrasonic pressure, the release of gas, explosion and implosion safety requirements.
This standard applies to noise measuring instruments and equipment; measured electroacoustic transducers; noise measurement, analysis, calculation, indication and/or recording
Equipment; noise measurement related non-measuring equipment such as signal generator, measuring standard, power supply; composition of noise measuring instrument part or design
A computer, a processor, etc. that are used only with a noise measuring instrument; an accessory for improving the electrical and acoustic performance of a noise measuring instrument.
This standard does not include the reliability, performance or other characteristics of the equipment independent of safety, the validity of the transport package, the electromagnetic compatibility (EMC) requirements, protective measures for the protection of the environment, maintenance (repair), maintenance (repair) personnel protection.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Determination of softening temperature (VST) of thermoplastics GB/T 1633-2000
GB/T 3768-1996 Acoustic vocal pressure method for the determination of noise sources Sound power level Reflective surface above the use of envelope measurement of the surface of the simple method
Electromagnetic sound level gauges - Part 1. Specifications
GB/T 4207-2012 Determination of resistance to traceability and comparison of electrical traces for solid insulation materials
GB 4208-2008 enclosure protection class (IP code)
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements
GB 5013 (all parts) Rated voltage 450/750V and below rubber insulated cable
GB 5023 (all parts) Rated voltage 450/750V and below PVC insulated cables
Graphical symbols for use in electrical equipment - Part 2. Graphical symbols ISO /TS 545 Technical Corrigendum
Safety of laser products - Part 1. Classification of equipment, requirements
Safety requirements for audio, video and similar electronic equipment GB 8898-2011
GB/T 11020-2005 List of Flammability Test Methods for Solid Nonmetallic Materials Exposed to Flame Source
Electrical insulation - Heat resistance and presentation method GB/T 11021-2014
Industrial plugs and couplings - Part 1. General requirements GB/T 11918.1-2014
GB/T 11918.2-2001 Industrial plugs and couplers - Part 2. Dimensions of electrical accessories with bolts and insert
Capacity and interchangeability requirements
Low - voltage switchgear and controlgear - Part 1. General
GB 14048.3-2008 Low - voltage switchgear and controlgear - Part 3. Switches, isolators, disconnectors and fuses
Electrician
Electrical accessories - Wire assemblies and interconnecting wire assemblies GB/T GB/T 16404 Acoustic intensity method for the determination of sound power levels of noise sources - Part 1. Measurements at discrete points
GB/T 16927 (all parts) High voltage test technology
GB/T 16935.3-2005 Insulation coordination of equipment in low pressure systems - Part 3. Antifouling using coatings, tanks and molding […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 57 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32706-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32706-2016
$930.00