GB/T 32666.3-2016High grade and popular numerical control systems of machine tool—Part 3: Requirements and verification specifications for A.C. servo device (English PDF)
高档与普及型机床数控系统 第3部分：交流伺服驱动装置的要求及验收规范
This is a limited preview
Buy now to download the full PDF (36 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32666.3-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
November 1, 2016
Scope
GB/T 32666.3-2016 is the English-translated version of 高档与普及型机床数控系统 第3部分：交流伺服驱动装置的要求及验收规范.
GB/T 32666.3-2016 is the Chinese standard "High grade and popular numerical control systems of machine tool—Part 3: Requirements and verification specifications for A.C. servo device".
Its scope clause reads: This part of GB/T 32666 specifies the manufacture and acceptance of AC servo drives in high-end and general-purpose CNC machine tools Requirements and test evaluation methods.
This part applies to high-end and universal machine tool CNC servo drive system (hereinafter referred to as servo drive or product) And AC servo drive unit (hereinafter referred to as servo unit) and AC servo motor (hereinafter referred to as servo Motor) and so on.
For other similar AC servo drives, refer to this section. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 32666.3-2016
National Standard of the People's Republic of China
- ICS
- 25.040.20
- Classification
- J 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 working environment conditions
- 4.1 Climatic environmental conditions
- 4.2 Mechanical environmental conditions
- 4.3 Power Environmental Conditions
- 4.4 SPECIAL ENVIRONMENTAL CONDITIONS
- 5.1 AC servo drive (unit)
- 5.2 Servo motor
- 6.1 logo
- 6.2 Appearance and structure
- 6.3 component quality
- 6.4 Wire connection
- 6.6 Servo motor basic shape and installation dimensions
- 6.7 Axial clearance of servo motor
- 6.8 Radial runout of servo motor
- 6.9 Installation of the servo motor Mating surface Coaxiality and mounting Mating face perpendicularity
- 7.1 Housing protection
- 7.2 Shock protection
- 7.3 protection link
- 7.4 Insulation resistance
- 7.5 withstand voltage test
- 7.6 Leakage current
- 7.7 Fire protection and flame retardancy of nonmetallic materials
- 7.8 Electromagnetic emission interference
- 7.10 Fast Transient Burst Impedance
- 7.11 Surge (impact) immunity
- 7.12 Voltage sags and short interruptions
- 7.14 Radio Frequency Field Sensing Conduction Disturbance Immunity
- 7.15 Immunity performance criterion
- 7.16 Noise
- 8 Reliability
- 9 Product accompanying documents
- 9.1 Requirements
- 9.2 Test
- 10 packaging, storage and transportation
- 10.1 Packaging
- 11.1 Test conditions
- 11.2 Inspection rules
- 11.3 Inspection sequence
1 Scope
This part of GB/T 32666 specifies the manufacture and acceptance of AC servo drives in high-end and general-purpose CNC machine tools
Requirements and test evaluation methods.
This part applies to high-end and universal machine tool CNC servo drive system (hereinafter referred to as servo drive or product)
And AC servo drive unit (hereinafter referred to as servo unit) and AC servo motor (hereinafter referred to as servo
Motor) and so on. For other similar AC servo drives, refer to this section.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 191-2008 packaging and storage icon
GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature
GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature
GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db. alternating damp heat (12 h
12h cycle)
GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ea and guidance. Impact
GB/T 2423.8-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ed. Free fall
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Fc. Vibration (sinusoidal)
GB/T 2423.16-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test J and Guideline.
GB/T 2423.17-2008 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist
GB/T 2423.22-2012 Environmental testing for electric and electronic products - Part 2. Test methods - Test N. Temperature change
GB/T 2828.1-2012 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling by Reception Quality Limit (AQL) plan
GB 4208-2008 enclosure protection class (IP code)
Protection class (IP code) classification of the overall structure of rotating electrical machines GB/T 4942.1-2006
GB/T 5169.11-2006 Fire hazard test for electric and electronic products - Part 11. Basic test method for glowing wire/hot wire GB/T 5169.11-2006
Test method for burnability of glowing wire of the product
GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flame 50W Horizontal and vertical flame experiment method
Mechanical electrical safety machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1-2008
GB/T 6113.101-2016 Radio disturbance and immunity measuring equipment and measuring methods - Part 1-1. Radio disturbance
And immunity test equipment testing equipment
Specification for radio disturbance and immunity measurement equipment and methods of measurement - Part 1-2. Radio harassment GB/T 6113.102-2008.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32666.3-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 32666.2-2016 — High grade and popular numerical control system of machine tool—Part 2: Requirements and verification specifications for spindle drive device
GB/T 32666.1-2016 — High-grade and popular numerical control system of machine tool—Part 1: Requirements and verification specifications for numerical control device
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
Secure payment via Stripe
Payments accepted
GB/T 32666.3-2016
$560.00