Valid

GB/T 32666.2-2016High grade and popular numerical control system of machine tool—Part 2: Requirements and verification specifications for spindle drive device (English PDF)

高档与普及型机床数控系统第2部分：主轴驱动装置的要求及验收规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (49 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32666.2-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 25, 2016

Implementation date

November 1, 2016

Scope

GB/T 32666.2-2016 is the English-translated version of 高档与普及型机床数控系统第2部分：主轴驱动装置的要求及验收规范.

GB/T 32666.2-2016 is the Chinese standard "High grade and popular numerical control system of machine tool—Part 2: Requirements and verification specifications for spindle drive device".

Its scope clause reads: This part of GB/T 32666 specifies the technical requirements for the manufacture and acceptance of spindle drive devices for high-end and universal machine tool numerical control systems And test evaluation methods.

This part is applicable to the spindle drive device (hereinafter referred to as spindle drive device or product) and configuration of high-grade and universal machine tool numerical control system Spindle drive device AC spindle servo drive unit (hereinafter referred to as the spindle drive unit), AC spindle servo motor (hereinafter referred to as the spindle Motor).

Other similar drive devices can refer to this section. Note. high-end and universal machine tool CNC system spindle drive device AC spindle servo motor is divided into AC asynchronous spindle motor and AC synchronization master Shaft motor and so on.

This section only specifies the spindle drive with AC asynchronous spindle motor, and the spindle with AC synchronous spindle motor The drive will be regulated by another standard. Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 32666.2-2016

National Standard of the People's Republic of China

ICS: 25.040.20
Classification: J 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 normative reference document
3 Terms and definitions
4 working environment conditions
4.1 Climatic environmental conditions
4.2 Mechanical environmental conditions
4.3 Power Environmental Conditions
4.4 SPECIAL ENVIRONMENTAL CONDITIONS
5 functional and electrical performance
5.1 Spindle drive (unit)
5.2 Spindle motor
6.1 mark (logo)
6.2 Appearance and structure
6.3 Component Quality
6.4 Operation and maintenance convenience
6.5 spindle motor basic shape and installation size
6.6 Radial runout of the spindle motor
6.7 Radial round run of the spindle motor flange on the motor axis
6.9 Spindle motor outlet mode and lead wire
7.1 Housing protection
7.2 Shock protection
7.3 protection link
7.4 Insulation resistance
7.5 withstand voltage test
7.6 Fire protection and flame retardancy of nonmetallic materials
7.7 Electromagnetic emission interference
7.8 Electrostatic Discharge Immunity
7.10 Surge (impact) immunity
7.11 Voltage sags and short interruptions
7.12 radio frequency electromagnetic radiation immunity
7.13 Radio Frequency Field Sensing Conduction Disturbance Immunity
7.14 Immunity performance criterion
7.15 Noise
8 Reliability
9 Product accompanying file
9.1 Requirements
9.2 Test
10 packaging, storage and transportation
10.1 Packaging
10.2 Storage
11.1 Test conditions
11.2 Inspection rules
11.3 Inspection sequence

1 Scope

This part of GB/T 32666 specifies the technical requirements for the manufacture and acceptance of spindle drive devices for high-end and universal machine tool numerical control systems

And test evaluation methods.

This part is applicable to the spindle drive device (hereinafter referred to as spindle drive device or product) and configuration of high-grade and universal machine tool numerical control system

Spindle drive device AC spindle servo drive unit (hereinafter referred to as the spindle drive unit), AC spindle servo motor (hereinafter referred to as the spindle

Motor). Other similar drive devices can refer to this section.

Note. high-end and universal machine tool CNC system spindle drive device AC spindle servo motor is divided into AC asynchronous spindle motor and AC synchronization master

Shaft motor and so on. This section only specifies the spindle drive with AC asynchronous spindle motor, and the spindle with AC synchronous spindle motor

The drive will be regulated by another standard.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 191-2008 packaging and storage icon

GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature

GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db. alternating damp heat (12 h

12h cycle)

GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ea and guidance. Impact

GB/T 2423.8-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ed. Free fall

GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Fc. Vibration (sinusoidal)

GB/T 2423.16-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test J and Guideline.

GB/T 2423.17-2008 Environmental testing for electric and electronic products - Part 2. Test methods Test Ka. Salt mist

GB/T 2423.22-2012 Environmental testing for electric and electronic products - Part 2. Test methods - Test N. Temperature change

GB/T 2828.1-2012 Count Sampling Inspection Procedures Part 1. Batch Inspection Sampling by Reception Quality Limit (AQL) plan

GB 4208-2008 enclosure protection class (IP code)

Protection class (IP code) classification of the overall structure of rotating electrical machines GB/T 4942.1-2006

GB/T 5169.11-2006 Fire hazard test for electric and electronic products - Part 11. Basic test method for glowing wire/hot wire GB/T 5169.11-2006

Test method for burnability of glowing wire of the product

GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flame 50W Horizontal and vertical flame experiment method

Mechanical electrical safety machinery - Electrical equipment - Part 1. General technical requirements GB 5226.1-2008

GB/T 6113.101-2008 Radio disturbance and immunity measuring equipment and measuring methods - Part 1-1. Radio disturbance […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 49 pages — is available in the English PDF.

Referenced standards

Normative references

GB 4208-2008

Similar standards

GB/T 41970-2022|GB/T 40328-2021|GB/T 40329-2021|GB/T 39127-2020|GB/T 39128-2020|GB/T 39129-2020

How to Download GB/T 32666.2-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.