Valid

GB/T 32650-2016Determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry(ICP-MS) (English PDF)

电感耦合等离子质谱法检测石英砂中痕量元素

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32650-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 25, 2016

Implementation date

November 1, 2016

Scope

GB/T 32650-2016 is the English-translated version of 电感耦合等离子质谱法检测石英砂中痕量元素.

GB/T 32650-2016 is the Chinese standard "Determining the content of trace elements in arenaceous quartz by inductively coupled plasma mass spectrometry(ICP-MS)".

Its scope clause reads: This standard specifies the determination method for the trace elements of aluminum, calcium, iron, sodium, potassium, lithium, magnesium, chromium, nickel, boron, manganese, copper and titanium in quartz sand.

This standard is applicable to the determination of trace elements in aluminum, calcium, iron, sodium, potassium, lithium, magnesium, chromium, nickel, boron, manganese, copper and titanium.

Other yuan The determination of the content of the substance can be carried out according to this standard. Its clauses include normative reference documents; principle of the method; interference factors; reagents and materials.

Found what you need?

Document preview — GB/T 32650-2016

National Standard of the People's Republic of China

ICS
31.030
Classification
L 90

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 Principle of the method
  • 4 interference factors
  • 5 reagents and materials

1 Scope

This standard specifies the determination method for the trace elements of aluminum, calcium, iron, sodium, potassium, lithium, magnesium, chromium, nickel, boron, manganese, copper and titanium in quartz sand.

This standard is applicable to the determination of trace elements in aluminum, calcium, iron, sodium, potassium, lithium, magnesium, chromium, nickel, boron, manganese, copper and titanium. Other yuan

The determination of the content of the substance can be carried out according to this standard.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 6682 Analytical laboratory water specifications and test methods

Clean rooms and associated controlled environments - Part 1. Air cleanliness class

3 Principle of the method

The samples were digested with hydrofluoric acid and analyzed by inductively coupled plasma mass spectrometry in nitric acid medium. Inductively coupled plasma mass spectrometer from

Sub-source and mass spectrometer two parts. The sample solution is atomized by the carrier gas into the ion source torch flame, after evaporation, dissociation, atomization, electricity

From the process, into a positively charged ions, through the acquisition system into the mass spectrometer, mass spectrometer according to the mass to charge ratio separation. For certain

The mass-to-mass ratio is proportional to the number of ions entering the mass spectrometer. The concentration of the sample is proportional to the area of the mass spectrum

Standard series is more quantitative.

4 interference factors

4.1

In the course of the test there are usually two-atom ions, multiple ions, matrix effect, background noise, interference between elements, cross-contamination and instrumentation

Drift and other factors.

4.2

Sampling, sample preparation and analysis of the purity of the reagent, the cleanliness of the equipment and the introduction of pollution during the operation will also affect the test results.

5 reagents and materials

5.1 Ultra-pure water

meet the GB/T 6682 in the laboratory water level specifications, while the resistivity is greater than 18Mohm · cm.

5.2 hydrofluoric acid

mass fraction of 40%, MOS grade high purity reagent.

5.3 nitric acid

mass fraction of 65%, MOS grade high purity reagent.

5.4 nitric acid solution (2 98)

take 20mL nitric acid, slowly add 980mL of ultra-pure water.

5.5

Standard Storage Solution for Aluminum, Calcium, Iron, Sodium, Potassium, Titanium, Magnesium, Chromium, Nickel, Boron, Manganese, Copper, Scandium Element. 1000 µg/mL, respectively.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32650-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32650-2016

$85.00