Valid

GB/T 32638-2016Technical requirements and test method for power adapter and charging/data port of mobile telecommunication terminal equipment (English PDF)

移动通信终端电源适配器及充电/数据接口技术要求和测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (52 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32638-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 25, 2016

Implementation date

November 1, 2016

Scope

GB/T 32638-2016 is the English-translated version of 移动通信终端电源适配器及充电/数据接口技术要求和测试方法.

GB/T 32638-2016 is the Chinese national standard covering technical requirements and test method for power adapter and charging/data port of mobile telecommunication terminal equipment.

It was issued on 25 April 2016 and has been in force since 1 November 2016, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 2016 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 32638-2016

National Standard of the People's Republic of China

ICS
33.120.01
Classification
M 37

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • [Preview only]
  • 1 Scope
  • 1.2 Normative References
  • 1.3 Picture types
  • 2.1 Definitions
  • 2.2 Types of Receivers
  • 2.3 Peripheral Connectors
  • 2.4 Measurements
  • 2.5 Equipment classification
  • 2.6 Receiver and transmitter
  • 2.7 Power controls and supply network impedances
  • 2.8 Voltage change and flicker
  • 2.9 Plastic pipes and fittings
  • 3 1 test device
  • 3.1 General Conditions
  • 3.2 Test Signals
  • 3.3 Radiofrequency (r.f.) Television Signal
  • 3.4 Radiofrequency Input Signals
  • 3.5 Measuring System and Test Instruments
  • 3.6 Standard Measuring Conditions
  • 4 Sample 1 and Sample Preparation
  • 4.1 Electrical and Mechanical Performance
  • 4.2 Power Consumption
  • 4.3 REQUEST/RESPOND ser vice
  • 5 Test Procedure 2
  • 5.1 Tuning Characteristics
  • 5.2 Sensitivity
  • 5.3 Selectivity and Response to Undesired Signals
  • 5.4 Cement mortar
  • 6 2 eligibility criteria
  • 6.1 Characteristics of the Luminance Channel
  • 6.2 Characteristics of Chrominance Channel
  • 6.3 Balanced transmission procedures
  • 6.4 Manhole (handhole) overlay and tunnel trench cover slab
  • 6.5 Hole rings and covers
  • 7 Results
  • 7.1 General Properties of the Picture
  • 7.2 Synchronizing Quality
  • 7.3 Picture Size Stability Versus Changes of CRT Beam Current
  • 7.4 Characteristics Inherent in Projection Type Displays
  • 7.5 Characteristics Inherent in DCD Displays
  • 7.6 Characteristics Inherent in Widescreen Displays
  • 8 Characteristics Inherent in the Receivers Using Double-rate Scan Display
  • 8.1 General
  • 8.2 Preliminary acceptance
  • 8.3 Final acceptance
  • 9 Disturbance on the Picture Due to Signals Inserted into the Field Blanking Interval
  • 9.1 Introduction
  • 9.2 Method of Measurement
  • 9.3 Presentation of Results

1 Foreword

GB/T 32638-2016 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 25 April 2016 and has been in force since 1 November 2016.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 52 pages in English translation.

2 Scope Preview

GB/T 32638-2016 falls under ICS 33.120.01, in the field of telecommunications.

This catalogue holds 1,124 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 52 pages

4 Related standards

Other editions:

GB/T 32638-2026 (later edition)

Standards on related subjects:

YD/T 2576.1-2013 — Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (Phase 1) - Part 1: Basic operation, services and reliability test

YD/T 2576.2-2013 — Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (phase 1) - Part 2: Radio transmission and reception performance test

YD/T 2307-2011 — Technical requirement and testing methods for general function of mobile telecommunication terminal

GB/T 19490-2021 — Telecommunication regulations for maritime mobile services—General requirement

GB/T 15844-2017 — General specification for professional radio transceiver employing F3E emission in the mobile services

5 Classification and status

International classification (ICS): 33.120.01

Chinese Standard Classification (CCS): M 37

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 52 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 32638-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
52 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32638-2016

$1,148.00