GB/T 32587-2016Supply power system of DC600V in railway passenger train (English PDF)
旅客列车DC600V供电系统
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32587-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 25, 2016
Implementation date
November 1, 2016
Scope
GB/T 32587-2016 is the English-translated version of 旅客列车DC600V供电系统.
GB/T 32587-2016 is the Chinese standard "Supply power system of DC600V in railway passenger train". Its scope clause reads: This standard specifies the technical requirements, inspection methods and inspection rules of supply power system of DC600V in railway passenger train and its components.
This standard is applicable to passenger trains and centralized power EMUs of electric traction with supply power system of DC600V. This standard is also applicable to passenger trains and centralized power EMUs of internal combustion traction (except the power supply auxiliary generator sets) with supply power system of DC600V.
It may serve as a reference for diversified power EMUs. Its clauses include environmental conditions; composition and technical requirements of system.
Found what you need?
Document preview — GB/T 32587-2016
National Standard of the People's Republic of China
- ICS
- 45.060
- Classification
- S 51
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Environmental conditions
- 4 Composition and technical requirements of system
- 5 Technical requirements for components
- 6 Inspection method
- 7 Inspection rules
- Annex A (Normative) Inspection methods of inverters
- Annex B (Normative) Inspection method of charger
- Annex C (Normative) Inspection method of DC600V power supply device
- .detail td {
1 Scope
This standard specifies the technical requirements, inspection methods and inspection rules of supply power system of DC600V in railway passenger train and its components.
This standard is applicable to passenger trains and centralized power EMUs of electric traction with supply power system of DC600V.
This standard is also applicable to passenger trains and centralized power EMUs of internal combustion traction (except the power supply auxiliary generator sets) with supply power system of DC600V.
It may serve as a reference for diversified power EMUs.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 1402 Railway applications - Supply voltages of traction systems (GB/T 1402-2010, IEC 60850:2007, MOD)
GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2: Test methods - Test Db: Damp heat, cyclic (12h+12h cycle) (IEC 60068-2-30: 2005, IDT)
GB 4208 Degrees of protection provided by enclosure (IP code) (GB 4208-2008, IEC 60529:2001, IDT)
GB/T 15142-2011 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
GB/T 21563 Railway applications - Rolling stock equipment - Shock and vibration tests (GB/T 21563-2008, IEC 61373:1999, IDT)
GB/T 24338.4 Railway applications - Electromagnetic compatibility - Part 3-2:Rolling stock - Apparatus (GB/T 24338.4-2009, IEC 62236-3-2:2003, MOD)
GB/T 25022-2010 Vehicle end electric communication (control) couplers for locomotives and rolling stocks
GB/T 25023-2010 Vehicle end power couplers for locomotives and rolling stocks
GB/T 25119-2010 Railway applications - Electronic equipments used on rail vehicles (IEC 60571:2006, MOD)
GB/T 32595-2016 Electric controller for railway passenger car and multiple unit
TB/T 1507 Rules for installation of cabling for electrical equipment of locomotives
TB/T 1508-2005 Technical specification for locomotive electrical cubicle
TB/T 1759 Rules for installation of cabling for railway passenger car
TB/T 2397-1993 Test method of generator cars for railway air-conditioned passenger cars
TB/T 2977 Ground protection of the metal parts of railway vehicle
UIC 552 Electrical power supply for trains - Standard technical characteristics of the train line
3 Environmental conditions
3.1 Ambient temperature
-40°C to +45°C.
3.2 Storage temperature
-40°C to +60°C.
3.3 Relative humidity
the mean maximum relative humidity in the wettest month is not greater than 95% (the mean minimum temperature in this month is 25°C).
3.4 Altitude
<=2,500m.
3.5
The vibration and shock shall meet the requirements of GB/T 21563.
3.6
The OCS voltage in electrified section shall meet the requirements of GB/T 1402.
3.7
Any environmental conditions of the train operation section not complying with the above subclauses shall be determined by the user and the manufacturer through negotiation.
4 Composition and technical requirements of system
4.1 Composition
4.1.1 Centralized rectification and decentralized conversion is adopted for the supply power system of DC600V in railway train. The system is mainly composed of DC600V power supply device, vehicle end coupler, DC600V/AC380V passenger car air conditioning inverter (hereinafter referred to as inverter), DC600V/DC110V passenger car charger (hereinafter referred to as charger), passenger car electrical integrated control cabinet, battery pack, DC600V transmission and distribution wires and cables and electrical loads.
4.1.2
The supply power system and components of train shall be designed and produced according to this standard and the specified procedure.
4.1.3
For passenger trains powered by electric and diesel locomotives and generator cars, two independent power supply modes are adopted for DC600V power supply; the independent power supplies for EMUs shall be determined according to the power supply capacity and the type of power supply devices.
4.1.4
The DC110V power supplies of locomotives (generator cars) and passenger cars shall be independent of each other, and all passenger cars shall be connected. Batteries and chargers of each car shall be connected in parallel with DC110V mains through anti-countercurrent diodes. The DC110V mains shall have insulation detection device. When the insulation to ground is less than 2kohm, alarm shall be given and the insulation value should be displayed. EMUs may be determined according to the unit combination mode.
4.1.5
The supply power system of DC600V in railway train shall be provided with a two-stage grounding protection circuit. The grounding protection action of passenger cars in groups shall precede the protection of DC600V power supply device.
4.1.6
The DC600V mains grounding protection circuit shall be provided for both vehicle-mounted and ground DC600V power supply devices, and resistance neutral point grounding protection circuit shall be adopted. See Figure 1 for the schematic diagram for equivalent circuit of resistance neutral point grounding protection, and Figure 1a) should be adopted.
4.1.7
The DC600V on-line insulation detection device of each passenger car (trailer) is arranged in the electrical integrated control cabinet of this vehicle. When the DC leakage current of the vehicle exceeds the protection set value (100mA), the DC600V power supply of the vehicle shall be cut off. Mains insulation detection devices shall be arranged at the first and last cars to monitor the insulation state of the mains. When the insulation resistance to ground is less than 800ohm, an alarm shall be given, and the insulation value shall be displayed.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32587-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32587-2016
$375.00