GB/T 32544-2016Acoustic emission examination and evaluation methods of steel structures of bridge and gantry cranes (English PDF)
桥式与门式起重机金属结构声发射检测及结果评定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32544-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 24, 2016
Implementation date
September 1, 2016
Scope
GB/T 32544-2016 is the English-translated version of 桥式与门式起重机金属结构声发射检测及结果评定方法.
GB/T 32544-2016 is the Chinese standard "Acoustic emission examination and evaluation methods of steel structures of bridge and gantry cranes". Its scope clause reads: This standard specifies the bridge and gantry crane metal structure of the acoustic emission detection and evaluation methods.
This standard applies to GB/T 20776 in the bridge and gantry crane (hereinafter referred to as crane). Newly manufactured cranes and Other types of cranes can also refer to the implementation. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 32544-2016
National Standard of the People's Republic of China
- ICS
- 53.020.20
- Classification
- J 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 staff qualifications
- 6 detection system
- 7 test procedures
- 8 test results assessment
- 9 Acoustic emission recheck
- 10 test report
- Appendix A (Normative) Acoustic emission detection system performance requirements
- Appendix B (informative) acoustic emission sensor layout diagram
- Appendix C (Informative) Acoustic emission inspection report format
1 Scope
This standard specifies the bridge and gantry crane metal structure of the acoustic emission detection and evaluation methods.
This standard applies to GB/T 20776 in the bridge and gantry crane (hereinafter referred to as crane). Newly manufactured cranes and
Other types of cranes can also refer to the implementation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3323 metal fusion welded joints radiography
GB/T 5905 crane test specifications and procedures
GB/T 12604.4 Non-destructive testing - Acoustic emission testing
GB/T 19800 nondestructive testing acoustic emission detection of a transducer calibration
Non - destructive testing - Acoustic emission detection Acoustic emission sensor secondary calibration
GB/T 20776 Crane classification
JB/T 6061 non-destructive testing of magnetic particle testing
JB/T 6062 non-destructive testing of weld penetration testing
JB/T 10559 Lifting appliances nondestructive testing ultrasonic testing of steel welds
3 Terms and definitions
GB/T 12604.4 defined and the following terms and definitions apply to this document.
3.1 Acoustic emission source
The physical source or location of a material that generates a transient elastic wave with rapid energy release.
3.2 Acoustic emission source
The position of the acoustic emission source on the test object is determined by analyzing the acoustic emission data.
Note. Several common source positioning methods include zone positioning, calculation positioning, and continuous signal positioning.
3.3 Active activity
The number of AE events varies with the loading process or time.
3.4 Intensity
The average elastic energy released by acoustic emission source events.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32544-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32544-2016
$235.00