GB/T 32516-2016Thyristor valves of multistage controlled shunt reactors in extra high-voltage transmission systems (English PDF)

1 Scope

This standard specifies the UHP grade controllable shunt reactor thyristor valve main technical requirements, inspection rules, test, packaging, transportation and storage.

This standard applies to 500kV, hierarchical 750kV voltage power transmission systems using controllable shunt reactor thyristor valve, hierarchical other voltage power transmission systems using controllable shunt reactors thyristor valve (hereinafter referred to as the thyristor valve) may refer to .

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.

GB 311.1 insulation coordination - Part 1. Definitions, principles and rules

GB/T 311.2 Insulation coordination - Part 2. Guide to the use

GB 4798.2 electric and electronic product application of environmental conditions - Part 2. Transport

GB/T 7354 partial discharge measurement

GB/T 13384 mechanical and electrical products packaging General technical conditions

GB/T 13498-2007 HVDC term

GB/T 14598.9-2010 measuring relays and protection equipment - Part 22-3. Electrical disturbance tests - Radiated electromagnetic field immunity GB/T 14598.10-2012 measure 22-4 Part relays and protection equipment. Electrical disturbance tests - Electrical fast transient/burst immunity test

GB/T 14598.13-2008 Electrical relays - Part 22-1. Electrical disturbance tests measure 1MHz burst immunity tests for measuring relays and protection equipment

GB/T 20990.1 HVDC thyristor valve - Part 1. Electrical testing

3 Terms and Definitions

The following terms and definitions apply to this document.