Valid

GB/T 32434-2015Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems (English PDF)

塑料管材和管件燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32434-2015 in 30 minutes.

Issued by

Standardization Administration of China

Level / Type

National · Recommended

Issue date

December 31, 2015

Implementation date

July 1, 2016

Scope

GB/T 32434-2015 is the English-translated version of 塑料管材和管件燃气和给水输配系统用聚乙烯（PE）管材及管件的热熔对接程序.

GB/T 32434-2015 — This standard specifies the PE80 and PE100 polyethylene mixed ingredients manufactured in gas and water distribution systems using polyethylene (PE) pipe and Butt the general principles of quality control procedures and fittings.

This standard butt fusion procedures apply to the nominal diameter 75mm ~ 630mm gas and water delivery system polyethylene (PE) pipes and fittings; single low pressure Butt procedure applies to not more than 70mm wall thickness of the gas and water delivery systems Polyethylene (PE) pipes and fittings for butt fusion program; dual low-voltage Butt procedure applies to wall thickness greater than 22mm and not more than 70mm of Gas and water transportation systems - Polyethylene (PE) pipes and fittings for butt fusion program.

Found what you need?

Document preview — GB/T 32434-2015

National Standard of the People's Republic of China

ICS: 83.140.30
Classification: G 33

Issued by: Standardization Administration of China

What this standard covers1
Document data2
Standards quoted by this document3

What this standard covers

This standard specifies the hot-melt docking procedures for polyethylene (PE) pipes and fittings for gas and water supply and distribution systems made of PE 80 and PE 100 blends, and general principles for quality control. The hot-melt docking procedure specified in this standard is applicable to polyethylene (PE) pipes and fittings with nominal outer diameter of 75 mm to 630 mm for gas and water supply systems; a single low-pressure hot-melt docking procedure is applicable to wall thicknesses of not more than 70 mm (PE) pipes and fittings for gas and water supply systems; dual low-pressure hot-melt docking program for polyethylene (PE) gas and feedwater delivery systems with wall thicknesses greater than 22 mm and not more than 70 mm; Pipe and pipe fittings of the hot-melt docking program.

Document data

International classification (ICS): 83.140.30.

Chinese classification (CCS): G33.

Estimated length of the Chinese original: 23,263 words.

Adopted international standard: ISO 21307-2011, MOD.

Standards quoted by this document

GB/T 6111; GB/T 13663; GB/T 13663.2; GB 15558.1; GB 15558.2; GB/T 19278-2003; GB/T 19810; GB/T 20674.1; CJJ 63-2008

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 1167 · GB/T 13663 · GB/T 13663-2000 · GB 15558.1 · GB 15558.1-2015 · ISO 4437 · ISO 8085 · ISO 13953 · ISO 12176

Cited by

GB/T 20674.1-2020Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion

How to Download GB/T 32434-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.