GB/T 19810-2005Polyethylene (PE) pipe and fittings -- Determination of the tensile strength and failure mode of test pieced from a butt-fused joint (English PDF)
聚乙烯(PE)管材和管件 热熔对接接头拉伸强度和破坏形式的测定
This is a limited preview
Buy now to download the full PDF (5 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19810-2005 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee
Level / Type
National · Recommended
Issue date
March 23, 2005
Implementation date
October 1, 2005
Scope
GB/T 19810-2005 is the English-translated version of 聚乙烯(PE)管材和管件 热熔对接接头拉伸强度和破坏形式的测定.
GB/T 19810-2005 — This standard specifies: Determination of polyethylene (PE) Butt components tensile strength and failure mode test methods. This standard applies to: nominal outside diameter of not less than 9, mm-polyethylene (PE) pipe and pipe or spigot end pipes and fittings Butt joints.
Found what you need?
Document preview — GB/T 19810-2005
National Standard of the People's Republic of China
- ICS
- 83.140.30
- Classification
- G 33
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People Republic of China, China National Standardization Administration Committee
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This standard specifies: Determination of polyethylene (PE) Butt components tensile strength and failure mode test methods. This standard applies to: nominal outside diameter of not less than 9, mm-polyethylene (PE) pipe and pipe or spigot end pipes and fittings Butt joints. This method can be used in conjunction with other test methods, to determine for fusion welded joints quality.
Document data
International classification (ICS): 83.140.30.
Chinese classification (CCS): G33.
Estimated length of the Chinese original: 7,738 words.
Adopted international standard: ISO 13953-2001; IDT.
Standards quoted by this document
GB/T 19809
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 15558.5-2023Buried polyethylene(PE) piping systems for the supply of gaseous fuels - Part 5: Fitness for purpose of the system
- GB/T 28799.5-2020Heat-resistant polyethylene (PE-RT) piping system for hot and cold water - Part 5: System suitability
- GB/T 13663.3-2018Polyethylene (PE) piping systems for water supply -- Part 3: Fittings
- GB/T 13663.5-2018Polyethylene (PE) piping systems for water supply -- Part 5: Fitness for purpose of the system
- GB/T 32434-2015Plastics pipes and fittings -- Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
How to Download GB/T 19810-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 19810-2005
$45.00