GB/T 32371.4-2015Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application—Part 4: Determination of volatile diisocyanates (English PDF)
低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第4部分:挥发性二异氰酸酯的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32371.4-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
July 1, 2016
Scope
GB/T 32371.4-2015 is the English-translated version of 低溶剂型或无溶剂型胶粘剂涂敷后释放特性的短期测量方法 第4部分:挥发性二异氰酸酯的测定.
GB/T 32371.4-2015 is the Chinese standard "Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application—Part 4: Determination of volatile diisocyanates".
Its scope clause reads: After this part of GB/T 32371 specifies the low-solvent or solvent-free adhesive coating, volatile diisocyanate release characteristics test methods.
This section applies only to the low-solvent or solvent-free adhesive coated surface of the release was measured in the short term volatility of diisocyanate. Its clauses include reagents and materials.
Found what you need?
Document preview — GB/T 32371.4-2015
National Standard of the People's Republic of China
- ICS
- 83.180
- Classification
- G 38
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 4 Reagents and materials
- 4.1 acetonitrile
1 Scope
After this part of GB/T 32371 specifies the low-solvent or solvent-free adhesive coating, volatile diisocyanate release characteristics test methods.
This section applies only to the low-solvent or solvent-free adhesive coated surface of the release was measured in the short term volatility of diisocyanate.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 32371.1 after low-solvent or solvent-free adhesive coated release characteristics of short-term methods of measurement - Part 1. General
ISO 16000-9 Indoor air - Part 9. Determination of building products and furniture VOC emission test release
Test cabin Act (Indoorair-Part 9. Determinationoftheemissionofvolatileorganiccompoundsfrombuilding productsandfurnishing-Emissiontestchambermethod)
ISO 16702.2007 Workplace air quality using 1- (2-methoxyphenyl) piperazine and liquid chromatography in the air isocyanate
The total content of ester groups can be detected [Workplaceairquality-Determinationoftotalorganicisocyanategroupsin airusing1- (2-methoxyphenyl) piperazineandliquidchromatography]
Manual sampling pumps - Requirements and test methods (Workplaceatmos- EN1232 workplace atmospheric chemicals pheres-Pumpsforpersonalsamplingofchemicalagents-Requirementsandtestmethods)
Principle 3
Release test collection compartment sufficient air flow rate through the appropriate 1- (2-methoxyphenyl) piperazine (1-2MP) reagent impregnated
Glass fiber adsorption, air volatile isocyanate with 1-2MP react to form a non-volatile isocyanate urea derivatives. use
Acetic anhydride and 1-2MP complete solution for sample analysis in toluene. The resulting solution was concentrated and dried with ultraviolet (UV) detector
Or diode array detector (DAD) High Performance Liquid Chromatography (HPLC) analysis. Isocyanate reaction of the isocyanate derivatives
Biological spectrum with the standard retention time and qualitative comparison, atlas by peak height or peak area quantification.
4 Reagents and materials
4.1 acetonitrile
HPLC grade.
1- (2-methoxyphenyl) piperazine, abbreviation. 1-2MP, purity > 98%.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32371.4-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 32371.3-2015 — Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 3: Determination of volatile aldehydes
GB/T 32371.2-2015 — Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 2: Determination of volatile organic compound
GB/T 32371.1-2015 — Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 1: General procedure
Secure payment via Stripe
Payments accepted
GB/T 32371.4-2015
$145.00