GB/T 32371.1-2015Short term method for measuring the emission prorerties of low-solvent or solvent-free adhesives after application—Part 1: General procedure (English PDF)

1 Scope

This section GB/T 32371 specifies the general low-solvent or solvent-free adhesives volatiles release characteristics of short-term measurements

The method of the basic requirements, including the release of test chamber, the adhesive sample preparation, testing procedures, the results of data processing.

This section applies only to the low-solvent or solvent-free adhesive coated surface of the short-term VOC emission measurement.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2943 Adhesive term

GB/T 20740 adhesive sampling

GB/T 32371.2 short-term measurement methods - Part 2 after the low-solvent or solvent-free adhesive coated release characteristics. volatility

Determination of organic compounds

GB/T 32371.3 after low-solvent or solvent-free adhesive coated release characteristics of short-term methods of measurement - Part 3. Volatile

Determination of aldehydes

After GB/T 32371.4 low-solvent or solvent-free adhesive coating method for measuring short-term release characteristics - Part 4. Volatile

Determination of diisocyanate

ISO 554 regulation and/or experimental standard atmospheric Specification (Standardatmospheresforconditioningand/or testing-Specifications)

ISO 16000-6 Indoor air - Part 6. Determination of indoor air and the air in the test chamber using VOC TenaxTA active adsorbent sampling, pyrolysis and adsorption MS or MS-FID gas chromatography (Indoorair-Part 6. De- terminationofvolatileorganiccompoundsinindoorandtestchamberairbyactivesamplingonTenax

TAsorbent, thermaldesorptionandgaschromatographyusingMSorMS-FID)

ISO 16000-9 Indoor air - Part 9. building products and furniture VOC emission measurement release

Test chamber method (Indoorair-Part 9. Determinationoftheemissionofvolatileorganiccompoundsfrom buildingproductsandfurnishing-Emissiontestchambermethod)

Determination of building products and furniture of VOC emission. ISO 16000-10 Indoor air - Part 10

Release test cell method (Indoorair-Part 10. Determinationoftheemissionofvolatileorganiccompoundsfrom buildingproductsandfurnishing-Emissiontestcelmethod)

3 Terms and Definitions

GB/T 2943 defined by the following terms and definitions apply to this document.