Valid

GB/T 32204-2015Industrial process calibrator (English PDF)

工业过程校准器

Preview PDF

This is a limited preview

Buy now to download the full PDF (38 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32204-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2015

Implementation date

July 1, 2016

Scope

GB/T 32204-2015 is the English-translated version of 工业过程校准器.

GB/T 32204-2015 is the Chinese standard "Industrial process calibrator".

Its scope clause reads: This standard specifies the Industrial Process Calibrator (hereinafter referred to as the Calibrator) terms and definitions, working conditions, classification, security, performance, versatility to Requirements, environmental testing, inspection rules, test period, test methods and marking, packaging, transport and storage.

This standard applies to desktop, handheld calibrator. Scope includes all the territory of People's Republic of China in the design and manufacture of school Aligner.

This standard is also applicable to other similar instrument or device and having a portion of the output measurement. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 32204-2015

National Standard of the People's Republic of China

ICS: 23.120
Classification: N 21

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 3 Operating Conditions
4.1 Normal working environment
4.2 Reference operating conditions
5 Category
5.1 According to the structure in the form of Class
5.2 Category 3 in accordance with power supply
6 Security features
6.1 Security
6.2 insulation
7 General requirements
7.1 Appearance
7.2 Function
7.3 Technical requirements
7.4 Electromagnetic compatibility
7.5 Power supply
9 8 Environmental Testing
8.1 high and low temperature test
8.2 Humidity Test
8.3 Vibration Test
8.4 drop test
9 8.5 Impact test
9 9 inspection rules
9.1 Test conditions
9.2 test category
9.3 factory inspection and determined that Rule
9.4 type of inspection, and failure classification results determined
9.5 Periodic Inspection
9.6 Test Item
9.7 testing equipment
10 Test Method
10.1 Security features
10.2 Appearance
10.3 Functional Check
10.4 Resolution
10.5 Indication Error
10.6 with a load capacity of
10.7 overload test
10.8 Input resistor
10.9 temperature on the amount of test
10.10 Effect of supply voltage variation amount
10.11 30 output stability test
10.13 31 series mode interference suppression
10.14 common-mode interference suppression
10.15 Electromagnetic Compatibility
10.16 Environmental Testing
11 signs, packaging, transportation and storage
11.1 mark
11.2 Packaging
11.3 Transportation and storage
Appendix A (informative) Uncertainty Evaluation Test Example
Annex B (informative) Periodic inspection records and test results
References
5 thermocouple output wiring diagram (with a thermocouple reference junction temperature automatic compensation)
7 RTD analog output wiring diagram
8 DC voltage measurement test method standard source wiring diagram ---
9 DC voltage measurement test wiring diagram --- meter method
11 DC current measurement test wiring diagram --- meter method
12 resistance measurement test wiring diagram (DC resistance box)
13 resistance measurement test wiring diagram (using a multifunction calibrator)
14 Frequency Measurement test wiring diagram
15 thermocouple wiring diagram (with a thermocouple reference junction temperature automatic compensation)
16 thermocouple wiring diagram (thermocouple reference junction does not have automatic temperature compensation)
17 thermal resistance measurement test wire system wiring diagram ---
18 thermal resistance measurement test wiring diagram --- Three-wire
19 thermal resistance measurement test wiring diagram --- four-wire
20 with a load capacity test voltage wiring diagram
21 current load capacity test wiring diagram
25 series mode rejection ratio test wiring diagram
26 common-mode rejection test wiring diagram

1 Scope

This standard specifies the Industrial Process Calibrator (hereinafter referred to as the Calibrator) terms and definitions, working conditions, classification, security, performance, versatility to

Requirements, environmental testing, inspection rules, test period, test methods and marking, packaging, transport and storage.

This standard applies to desktop, handheld calibrator. Scope includes all the territory of People's Republic of China in the design and manufacture of school

Aligner.

This standard is also applicable to other similar instrument or device and having a portion of the output measurement.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock

GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements

GB/T 6113 (all parts) radio disturbance and immunity measuring apparatus and methods -

GB/T 13384-2008 mechanical and electrical products packaging General technical conditions

GB/T 15479-1995 industrial automation instruments of insulation resistance, dielectric strength technical requirements and test methods

GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test

GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test

GB/T 17626.5-2008 Electromagnetic compatibility - Testing and measurement techniques - Surge (impact) immunity test

GB/T 17626.8-2006 Electromagnetic compatibility - Testing and measurement techniques - Power frequency magnetic field immunity test

GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test

GB/T 18271.3-2000 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3. effects of influence quantities

Test

GB/T 25480-2010 instrumentation transportation, storage and basic environmental conditions and test methods

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Calibrator

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.

Referenced standards

Cited by

GB/T 37086-2018Industrial process temperature calibrator

Similar standards

GB/T 45820-2025|GB/T 45821-2025|GB/T 44986-2024|GB/T 45053-2024|GB/T 42827-2023|GB/T 43080.3-2023

How to Download GB/T 32204-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.