Valid

GB/T 32192-2015Withstanding voltage tester (English PDF)

耐电压测试仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32192-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 10, 2015

Implementation date

July 1, 2016

Scope

GB/T 32192-2015 is the English-translated version of 耐电压测试仪.

GB/T 32192-2015 is the Chinese standard "Withstanding voltage tester". Its scope clause reads: This standard specifies the terminology and definitions, classification, requirements, inspection methods, inspection rules, marking, packaging, shipping and Storage.

This standard applies to the maximum output voltage of not more than 15kV digital display and analog (pointer) instructions of the AC (frequency) and DC The withstand voltage tester (hereinafter referred to as the "tester") is also applicable to the withstand voltage part of other test equipment which meets the above conditions.

This standard does not apply to the inter-turn impulse voltage tester and other output voltage for the pulse voltage or transient voltage voltage test equipment. Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 32192-2015

National Standard of the People's Republic of China

ICS
17.220.20
Classification
N 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 normative reference document
  • 3 Terms and definitions
  • 4 Product Category
  • 5 requirements
  • 6 Test Method
  • 7 Inspection rules
  • Appendix A (normative appendix) Representation of maximum permissible error and calculation formula for error
  • Appendix B (Normative Appendix) Test items and recommended test sequence

1 Scope

This standard specifies the terminology and definitions, classification, requirements, inspection methods, inspection rules, marking, packaging, shipping and

Storage.

This standard applies to the maximum output voltage of not more than 15kV digital display and analog (pointer) instructions of the AC (frequency) and DC The withstand voltage tester (hereinafter referred to as the "tester") is also applicable to the withstand voltage part of other test equipment which meets the above conditions.

This standard does not apply to the inter-turn impulse voltage tester and other output voltage for the pulse voltage or transient voltage voltage test equipment.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 191-2008 Packaging and storage icon (ISO 780..1997, MOD)

GB/T 2423.1-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test A. Low temperature (IEC 60068-2-

1..2007, IDT)

GB/T 2423.2-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test B. High temperature (IEC 60068-2-

2..2007, IDT)

GB/T 2423.4-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Db. alternating damp heat (12 h

12h cycle) (IEC 60068-2-30..2005, IDT)

GB/T 2423.5-1995 Environmental testing for electric and electronic products - Part 2. Test methods - Test Ea and guidance. Impact (IEC 60068-2-27. 1987, IDT)

GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Fc. Vibration (sinusoidal) (IEC 60068-2-6..1995, IDT)

GB/T 2423.22-2012 Environmental tests - Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14.

2009, IDT)

GB 4208-2008 enclosure protection class (IP code) (IEC 60529..2001, IDT)

GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements (IEC 61010 -

1..2001, IDT)

GB 4824-2013 Industrial, scientific and medical (ISM) RF equipment Disturbance characteristics Limits and measurement methods (CISPR11-

2003, IDT)

GB/T 6587-2012 General specification for electronic measuring instruments

General rules for the use of industrial products GB/T 9969-2008

Reliability test of electronic measuring instruments GB/T 11463-1989

General technical requirements for packaging of electromechanical products GB/T 13384-2008

Reliability requirements and test methods for digital communication equipment GB/T 13426-1992

GB/T 16511-1996 Electrical documentation for electrical and electronic measuring equipment (IEC 1187..1993, IDT)

GB/T 17626.2-2006 Electromagnetic compatibility test and measurement techniques Electrostatic discharge immunity test (IEC 61000-4-2..2001,

IDT) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32192-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
25 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32192-2015

$445.00