GB/T 32093-2015Determination of sodium iodate in cosmetics - Ion chromatography (English PDF)
化妆品中碘酸钠的测定 离子色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32093-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 9, 2015
Implementation date
May 1, 2016
Scope
GB/T 32093-2015 is the English-translated version of 化妆品中碘酸钠的测定 离子色谱法.
GB/T 32093-2015 is the Chinese standard "Determination of sodium iodate in cosmetics - Ion chromatography". Its scope clause reads: This standard specifies the ion chromatographic method of sodium iodide in cosmetics.
This standard applies to creams, lotions, liquid cosmetics in the determination of sodium iodate. The standard method detection limit of 0.00005%, the limit of quantification of 0.0002%.
Principle 2 Ultra-pure water with sodium extract samples after RP column (or rather who) purification by ion exchange chromatography - conductivity detector measurement, Paul Retention time qualitative, external standard. Its clauses include reagents and materials; instruments and equipment.
Found what you need?
Document preview — GB/T 32093-2015
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 3 Reagents and materials
- 3.3 Standard
- 3.4 standard stock solution (1000mg/L)
- 3.5 intermediate standard solution (100mg/L)
- 3.6 standard series working solution
- 4 instruments and equipment
1 Scope
This standard specifies the ion chromatographic method of sodium iodide in cosmetics.
This standard applies to creams, lotions, liquid cosmetics in the determination of sodium iodate.
The standard method detection limit of 0.00005%, the limit of quantification of 0.0002%.
Principle 2
Ultra-pure water with sodium extract samples after RP column (or rather who) purification by ion exchange chromatography - conductivity detector measurement, Paul
Retention time qualitative, external standard.
3 Reagents and materials
Unless otherwise indicated, the reagents used were of analytical grade water are ultrapure water resistivity of not less than 18.2Mohm · cm.
3.1
dichloromethane.
3.2
OnGuardII RP column, 1.0mL, or equivalent performance of other columns. Before use, respectively with 5mL of methanol, 10 mL water activated,
It can be used after placement 30min.
3.3 Standard
sodium, the purity of 99.4% -100.4%. Standard Substance CAS number, Chinese name, English name, INCI name, molecular
Formula, relative molecular mass Table A.1.
3.4 standard stock solution (1000mg/L)
Weigh accurately sodium 0.1g (accurate to 0.0001g), dissolved in water and dilute to 100mL,
Dubbed 1000µg/mL standard stock solution, placed in a brown bottle stable at 4 °C for 6 months.
3.5 intermediate standard solution (100mg/L)
standard stock solution Pipette 10.0mL, water volume to 100mL. Placed in a brown bottle 4 °C
Save stable under two months.
3.6 standard series working solution
the use of forward take appropriate intermediate standard solution (3.5), diluted with water formulated to 0.05mg/L, 0.25mg/L,
0.5mg/L, 2.5mg/L, 5.0mg/L, 10.0mg/L, 25.0mg/L series of standard working solution.
4 instruments and equipment
4.1
ion chromatography, electrical conductivity detector.
4.2
ultrapure water meter.
4.3
high-speed centrifuge, speed not less than 6500r/min.
4.4
vortex mixers.
4.5
ultrasonic cleaner.
4.6
Analytical balance.
The aqueous phase was 4.7 0.22µm microporous membrane.
Note. All glassware is required before successively with 2mol/L potassium hydroxide and water were soaked 4h, then washed three times to five times with ultrapure water, dried spare.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32093-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32093-2015
$145.00