Valid

GB/T 32068.1-2015Technical specification of operation of environment protection facilities for lead-acid battery manufacturers—Part 1: Lead dust and fume treatment system (English PDF)

铅酸蓄电池环保设施运行技术规范 第1部分: 铅尘、铅烟处理系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32068.1-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 9, 2015

Implementation date

November 1, 2016

Scope

GB/T 32068.1-2015 is the English-translated version of 铅酸蓄电池环保设施运行技术规范 第1部分: 铅尘、铅烟处理系统.

GB/T 32068.1-2015 is the Chinese standard "Technical specification of operation of environment protection facilities for lead-acid battery manufacturers—Part 1: Lead dust and fume treatment system".

Its scope clause reads: This section GB/T 32068 specifies the technical design lead-acid battery industry lead dust, lead fume treatment systems, construction, inspection and operation Surgery requirements.

This section applies to the new lead-acid battery business, changed (expanded) construction projects of lead dust, lead fume treatment system from design, construction, inspection, operation The whole process of project management and has been built lead dust, lead fume treatment system operation and management.

Found what you need?

Document preview — GB/T 32068.1-2015

National Standard of the People's Republic of China

ICS
29.220.20
Classification
K 84

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 overall design
  • 4.1 General provisions
  • 4.1.1 relevant national regulations
  • 4.1.2 Local Regulations
  • 4.1.3 Other standard
  • 4.1.4 adapt to the existing level of technology
  • 4.2 lead dust, lead fume gas properties, and the amount of gas generation mode
  • 4.2.1 lead dust, lead fume properties
  • 4.2.2 way lead dust, lead fume gas generation
  • 4.2.3 lead dust and lead fume amount of gas state
  • 4.3 Dust Process
  • 4.4 precipitator
  • 4.5 Set hood
  • 4.5.1 General provisions
  • 4.5.2 Category 6 gas collecting hood
  • 4.5.4 umbrella collection hood
  • 4.5.5 sealed gas collecting hood
  • 4.6 ventilation and dust removal pipe
  • 4.7 ventilation and dust removal pipe fittings
  • 4.8 Fan
  • 4.10 Noise
  • 5.1 baghouse
  • 5.1.1 General requirements
  • 5.1.2 baghouse calculation and selection
  • 5.1.3 claim 14 bag filter pulse valve
  • 5.2 cartridge filter
  • 5.2.1 General Provisions
  • 5.2.2 cartridge filter calculation and selection
  • 5.3 wet scrubber
  • 5.4 ESP
  • 5.5 high efficiency filter
  • 5.6 gravity settler
  • 5.7 Cyclone
  • 5.7.1 cyclone principle
  • 5.7.2 General Provisions
  • 5.7.3 cyclone structure
  • 5.7.4 precipitator design and selection
  • 6 major ancillary works
  • 6.1 ancillary works consisting of
  • 6.2 Supply and Distribution Requirements
  • 6.3 drainage requirements
  • 6.4 compressed gas
  • 6.5 Monitoring device
  • 7 construction and acceptance
  • 7.1 General provisions
  • 7.2 Construction Standards
  • 7.3 Installation
  • 7.3.1 Installer
  • 7.3.2 precipitator installation requirements
  • 7.3.3 dust coating
  • 7.3.4 Fan and motor installation requirements
  • 7.3.5 Ash equipment installation requirements
  • 7.3.6 dust pipe installation technical requirements
  • 7.3.7 Compressed air and steam piping installation requirements
  • 7.3.8 Electrical and thermal instrumentation installation requirements
  • 7.4 Commissioning
  • 7.4.1 Stand-alone debugging
  • 7.4.2 Electrical thermal instrumentation and automatic control system debugging
  • 7.4.3 lead fume and dust removal system linkage test
  • 7.4.4 Leak detection and pre-coated gray
  • 7.5 Acceptance
  • 7.5.1 acceptance
  • 7.5.2 Acceptance of Environmental Protection
  • 8 environmental protection and health and safety
  • 8.1 General Provisions
  • 8.2 Environmental Protection
  • 8.3 OCCUPATIONAL SAFETY
  • 8.4 Occupational Health
  • 9 Operation and Maintenance
  • 9.1 General Provisions
  • 9.2 baghouse system is running
  • 9.3 Wet dust removal system is running
  • 9.4 ESP system is running
  • 9.5 Cleaning System Maintenance
  • 9.6 Emergency Measures

1 Scope

This section GB/T 32068 specifies the technical design lead-acid battery industry lead dust, lead fume treatment systems, construction, inspection and operation

Surgery requirements.

This section applies to the new lead-acid battery business, changed (expanded) construction projects of lead dust, lead fume treatment system from design, construction, inspection, operation

The whole process of project management and has been built lead dust, lead fume treatment system operation and management.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 755 rotary motor fixed and performance

GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove

GB/T 985.2 SAW recommended groove

GB 2894 Safety Signs and use guidelines

GB 3608 high job rating

Management GB/T 3787 hand-held power tool, use, inspection and maintenance safety technical regulations

GB/T 3805 extra low voltage (ELV) limits

GB 4053 (all parts), fixed ladders and platform security requirements

GB 5725 Safety Net

GB 6095 belts

GB 6514 Safety code for painting painting process safety, ventilation and air purification

GB/T 6719 baghouse technology requirements

GB 7059 Safety requirements for portable ladder

GB 7251 (all parts), Low-voltage switchgear and control equipment

GB/T 8923 (all parts) of steel substrates before application of paints and visual assessment of surface cleanliness

GB 12348-2008 industrial enterprises of environmental noise emission standard plant boundary

GB/T 14048 (all parts), low-voltage switchgear and control equipment

GB 15577 Safety regulations for dust explosion

GB 16297 Air Pollutant Emission Standards

GB 25466-2010 lead, zinc and industrial pollutant discharge standards

GB 30484-2013 battery industry emission standards

GB 50014 outdoor drainage design specifications

GB 50015 Water and Drainage Design Specification

GB 50016 architectural design code for fire protection

GB 50019 Industrial building heating, ventilation and air conditioning design

GB 50029 air station design specifications […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32068.1-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32068.1-2015

$535.00