GB/T 32058-2015Test method of resistance projectile impact and bird impact for high speed multiple unit windshield and coach body exterior protected construction (English PDF)
高速动车组风挡玻璃及车体材料抗鸟撞、抗硬物冲击试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32058-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 13, 2015
Implementation date
May 1, 2016
Scope
GB/T 32058-2015 is the English-translated version of 高速动车组风挡玻璃及车体材料抗鸟撞、抗硬物冲击试验方法.
GB/T 32058-2015 is the Chinese standard "Test method of resistance projectile impact and bird impact for high speed multiple unit windshield and coach body exterior protected construction".
Its scope clause reads: This standard specifies the EMU windshield and anti-material body hit the bird, hard object impact test anti terms and definitions, security Prevention, evaluation and test report test conditions, test equipment and instruments, test methods, test results.
This standard applies to the design speed of not less than 200km/h high-speed EMU windshield glass and the body material of bird impact, anti-punching a hard object Shock test, other rail vehicle windscreen and anti-material body hit the bird, impact test against rigid materials can refer to use. Its clauses include terms and definitions; safety precautions; test conditions.
Found what you need?
Document preview — GB/T 32058-2015
National Standard of the People's Republic of China
- ICS
- 81.040
- Classification
- Q 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Terms and definitions
- 3 Safety Precautions
- 4 Test conditions
1 Scope
This standard specifies the EMU windshield and anti-material body hit the bird, hard object impact test anti terms and definitions, security
Prevention, evaluation and test report test conditions, test equipment and instruments, test methods, test results.
This standard applies to the design speed of not less than 200km/h high-speed EMU windshield glass and the body material of bird impact, anti-punching a hard object
Shock test, other rail vehicle windscreen and anti-material body hit the bird, impact test against rigid materials can refer to use.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1 Body material
Run-time body guard member or the windward side of the peripheral material. FRP composite materials such as the front panel, pantograph shroud, deceleration board.
2.2 Body projectile impact
Elastomers used to evaluate the windscreen and impact resistance of the body material, including aluminum shells and bombs birds.
2.3 Aluminum shells
For evaluating the windshield and the body material anti-shock hard object impact the ability of a particular aluminum alloy body.
2.4 Bird bomb bird
Impact test pieces for the bird and the bird wrapping material, usually reared chickens and other poultry in place of the bird.
2.5 Mounting Angle instalationangle
EMU windshield or car body material along the line of symmetry of the endpoint tangent angle with the horizontal plane of symmetry of the motor car.
3 Safety Precautions
Throughout the test period, shall designate the person responsible for site security, application ropes enclosed or separated by a fence test sites, including air from the muzzle
The extent appropriate to the region, including the test bed. A warning signal prior to transmission, so that all personnel evacuated. At the same time, responsible for the safety
Personnel inspect the site to ensure that the test site does not have anyone.
Equipment and instruments used in the test site shall make the necessary protection against the impact of debris causing damage.
After the test, the test site should be cleaned, removed the bird bomb fragments, sprayed disinfectant in the test area, kill bacteria and eliminate
Smell.
4 Test conditions
Unless otherwise specified, the test shall be carried out under the following conditions.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32058-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32058-2015
$135.00