Valid

GB/T 31884-2015Automatic detection system of tire/pavement noise using the on-board sound intensity method (English PDF)

车载式轮胎路面噪声自动测试系统

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31884-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 11, 2015

Implementation date

December 1, 2015

Scope

GB/T 31884-2015 is the English-translated version of 车载式轮胎路面噪声自动测试系统.

GB/T 31884-2015 is the Chinese standard "Automatic detection system of tire/pavement noise using the on-board sound intensity method".

Its scope clause reads: This standard specifies the vehicle tire road noise Automatic Test System (hereinafter referred to as the "System") technical requirements, test methods, inspection regulations Then, signs, packaging, transport and storage.

This standard applies to the use of vehicle sound intensity method of tire road noise Automatic Test System. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 31884-2015

National Standard of the People's Republic of China

ICS
93.080.30
Classification
P 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Sound intensity
  • 3.2 Sound intensity level
  • 3.3 Sound pressure - residual intensity index
  • 3.4 Sound intensity probe
  • 3.5 Side by side pp probe

1 Scope

This standard specifies the vehicle tire road noise Automatic Test System (hereinafter referred to as the "System") technical requirements, test methods, inspection regulations

Then, signs, packaging, transport and storage.

This standard applies to the use of vehicle sound intensity method of tire road noise Automatic Test System.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 3241 electro-acoustics octave and fractional octave filters

JJG992-2004 sound intensity measuring instrument

ASTMF2493 P225/60R1697S Radial Standard Reference Test Tire Size (StandardspecificationforP225 /

60R1697Sradialstandardreferencetesttire)

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Sound intensity

Steady sound field within a certain time transient sound intensity average. Sound field at some point, and perpendicular to the direction of the particle velocity per unit area

Sound on the unit of time can be called by the instantaneous sound intensity, which is a vector.

Note. The units of watts per square meter (W/m2).

3.2 Sound intensity level

Base 10 of 10 times the sound intensity and the reference sound intensity ratio of the number of sound intensity level in decibels (dB), the reference sound intensity in air is

1 × 10-12W/m2.

3.3 Sound pressure - residual intensity index

When the sound intensity probe in the acoustic field along its axis azimuth of sound intensity equal to 0 when the difference between the measured sound pressure level and sound system between the intensity level

Value in decibels (dB).

3.4 Sound intensity probe

Transducer system, its output signal can be processed to obtain a specific direction component of sound intensity.

3.5 Side by side pp probe

Intensity probe consists of two amplitude and phase matching of the microphones consisting of two microphones are arranged side by side, and has a fixed pitch, e.g.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31884-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31884-2015

$280.00