GB/T 31852-2015Treatment and disposal specification for chromite processing residue (English PDF)
铬渣处理处置规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31852-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 3, 2015
Implementation date
February 1, 2016
Scope
GB/T 31852-2015 is the English-translated version of 铬渣处理处置规范.
GB/T 31852-2015 is the Chinese standard "Treatment and disposal specification for chromite processing residue". Its scope clause reads: This standard specifies the terms and definitions of chromium slag disposal method, chromium slag disposal method, after the chromium residue and waste water treatment requirements deal with.
This standard applies to chromium slag disposal process. Its clauses include terms and definitions; chromium slag disposal method.
Found what you need?
Document preview — GB/T 31852-2015
National Standard of the People's Republic of China
- ICS
- 13.030.10
- Classification
- Z 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 chromium slag disposal method
1 Scope
This standard specifies the terms and definitions of chromium slag disposal method, chromium slag disposal method, after the chromium residue and waste water treatment requirements deal with.
This standard applies to chromium slag disposal process.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5085.3-2007 standard differential hazardous waste leaching toxic identification
HJ/T 299 methods for leaching toxicity of solid waste sulfuric acid nitric acid method
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Chromium
Chromite chromium compounds as raw materials in the process, after roasting, leaching residue produced after the chromium slag. Among them, chromite mining
Sludge with calcium roasting process (no added calcium roasting any substance) produced called calcium-free chromium slag.
4 chromium slag disposal method
4.1 calcium chromium slag produced chromium alloy
4.1.1 The principle of the method
Calcium chromium slag, reducing agents (coke, semi-coke or coal), flux (silica, lime or fluorite) and other high-temperature smelting in an electric furnace. High temperature
C is the slag oxide partial oxidation of CO, CO and C will restore the slag hexavalent chromium to trivalent chromium, and then the residue Cr2O3, Fe2O3 also
Original elemental Cr, Fe, Cr carbide is part of the iron carbide. Elemental Cr, Fe and carbides mutual melting molten metals (chromium phase), no
Low calcium chromium slag other constituents SiO2, MgO, Al2O3, or the like at a lower melting point eutectic mixture of flux action (slag phase). Ferrochrome
Molten slag phase and phase each other, and the relative density is greater than ferrochromium slag phase density, resulting in a two-phase stratified. Flux in the slag other components to generate a eutectic mixture
Compound while reducing the melting point and viscosity of the slag phase, easy and ferrochromium slag phase separation layered sequentially released. The main chemical reaction formula as follows.
2C O2 -> 2CO ->
2Na2CrO4 3CO -> 2NaCrO2 Na2CO3 2CO2 ->
4Na2CrO4 3C -> 4NaCrO2 2Na2CO3 2CO2 ->
Fe2O3 3C -> 2Fe 3CO ->
2/3Cr2O3 2C -> 4/3Cr 2CO -> […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31852-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31852-2015
$145.00