GB/T 41015-2021Technical requirements for solid waste vitrification product (English PDF)
固体废物玻璃化处理产物技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41015-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 41015-2021 is the English-translated version of 固体废物玻璃化处理产物技术要求.
GB/T 41015-2021 deals with the glassy products obtained when solid waste is vitrified, that is, melted at high temperature with fluxes and auxiliaries and then cooled.
It sets the technical and management requirements for these products, together with the test methods, inspection rules and the packaging, transport and storage conditions.
It is used to establish whether the product of vitrification is really in a glassy state and to check its environmental safety and quality management. Its normative references include the solid waste identification rules of GB 34330, the leaching methods for heavy metals and standards on construction sand, gravel and abrasives.
It does not apply to radioactive solid waste. It was issued on 31 December 2021 and has applied since 1 July 2022.
Found what you need?
Document preview — GB/T 41015-2021
National Standard of the People's Republic of China
- ICS
- 13.030.10
- Classification
- Z 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the technical requirements, management requirements, test methods, inspection rules, packaging, transportation and storage.
This document is applicable to the determination of the glass state of the products after vitrification of solid wastes, as well as the environmental safety and environmental safety of vitrification products. Quality Management.
This document does not apply to the disposal of radioactive solid waste.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analysis Laboratory Water Specifications and Test Methods
GB/T 14684 Construction Sand
GB/T 14685 Pebble and crushed stone for construction
GB/T 14848 Groundwater Quality Standard
GB/T 17850 (all parts) Technical requirements for non-metallic abrasives for blast cleaning of steel surfaces before coating
GB/T 18046-2017 Granulated blast furnace slag powder used in cement, mortar and concrete
GB/T 30810-2014 Determination method of leachable heavy metals in cement mortar
GB 34330 General Rules for the Identification Standard of Solid Waste
HJ/T 20 Technical Specification for Sampling and Sample Preparation of Industrial Solid Waste
HJ557 Solid waste leaching toxicity leaching method Horizontal shaking method
JTGF40 Technical Specification for Construction of Highway Asphalt Pavement
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Solid waste
Loss of original use value, or has not lost use value but was abandoned or abandoned in production, life and other activities Solid, semi-solid and gaseous articles and substances placed in containers, as well as articles and substances included in solid waste management as stipulated by laws and administrative regulations quality. After harmless processing, and comply with mandatory national product quality standards, it will not endanger public health and ecological safety, or according to The solid waste identification standards and identification procedures are determined not to be solid waste.
3.2 Vitrification treatment
The solid waste is mixed with a certain flux and auxiliaries to form a uniform molten substance under high temperature conditions, and then cooled to form a non-ferrous material. The process of shaping the product of the structure.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 14684Sand for construction
- GB/T 14685Pebble and crushed stone for construction
- GB/T 14848Standard for groundwater quality
- GB/T 18046-2017Ground granulated blast furnace slag used for cement, mortar and concrete
- GB/T 30810-2014Test methods for leachable ions of heavy metals in cement mortar
GB/T 17850 · HJ/T 20 · HJ557
Similar standards
How to Download GB/T 41015-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 34330-2017 — Identification standards for solid wastes - General rules
GB 34330-2025 — Identification standards for solid wastes General rules
GB/T 14684-2022 — Sand for construction
Secure payment via Stripe
Payments accepted
GB/T 41015-2021
$150.00