GB/T 31557-2015High speed CNC gantry-type engraving and milling machine with fixed crossbeam (English PDF)
高速数控定梁龙门雕铣机
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31557-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
January 1, 2016
Scope
GB/T 31557-2015 is the English-translated version of 高速数控定梁龙门雕铣机.
GB/T 31557-2015 is the Chinese standard "High speed CNC gantry-type engraving and milling machine with fixed crossbeam". Its scope clause reads: This standard specifies the technical requirements for high-speed CNC fixed beam gantry-type milling machine carving, test methods and inspection rules.
This standard applies to fixed beam gantry CNC engraving and milling machine (hereinafter referred to as engraving and milling machine), other forms of CNC engraving and milling machine, CNC engraving machine also Reference may be used. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31557-2015
National Standard of the People's Republic of China
- ICS
- 25.040.20
- Classification
- J 54
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 technical requirements
- 5 Test Method
- 6 Inspection Rules
- Appendix A (informative) Maximum cutting resistance testing machine and approximate calculation method
1 Scope
This standard specifies the technical requirements for high-speed CNC fixed beam gantry-type milling machine carving, test methods and inspection rules.
This standard applies to fixed beam gantry CNC engraving and milling machine (hereinafter referred to as engraving and milling machine), other forms of CNC engraving and milling machine, CNC engraving machine also
Reference may be used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements
GB/T 6576-2002 machine lubrication system
GB/T 7932-2003 General technical conditions of pneumatic systems
GB/T 9061-2006 General technical conditions for metal cutting machine tools
GB 15760-2004 Metal-cutting machine tool safety general technology condition
GB/T 16769-2008 Metal-cutting machine noise level measurements
GB/T 17421.1-1998 Test code for machine tools - Part 1. under no-load or finishing conditions Geometric accuracy of machines
GB/T 17421.2-2000 Test code for machine tools - Part 2. CNC axis positioning accuracy and repeatability of determination
GB/T 25373-2010 Metal Cutting Machine Assembly General technical conditions
GB/T 25376-2010 Metal cutting machine tools, machining parts General technical conditions
GB/T 26220-2010 Industrial automation systems and integration - Numerical control machine tool numerical control system General technical conditions
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
High-speed fixed beam gantry CNC engraving and milling machine highspeedCNCgantry-typeengravingandmilingmachinewith fixedcrossbeam
Surface Machining feed rate greater than 6m/min, spindle power is greater than the maximum speed is greater than 2kW and 18000r/min, the width of the table
To 1000mm fixed beam gantry CNC machine tools.
4. Technical Requirements
4.1 General Requirements
When according to the acceptance criteria, should also be on the GB/T 9061-2006, GB/T 25376-2010, GB/T 25373-2010 in without the
Specific standards of the rest of the project acceptance inspection.
4.2 Accessories and Tools
4.2.1
should be randomly supplied accessories and tools listed in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31557-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 31557-2015
$475.00