GB/T 31453-2015Monitoring and testing code for energy conservation of oilfield production system (English PDF)
油田生产系统节能监测规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31453-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
August 1, 2015
Scope
GB/T 31453-2015 is the English-translated version of 油田生产系统节能监测规范.
GB/T 31453-2015 is the Chinese standard "Monitoring and testing code for energy conservation of oilfield production system".
Its scope clause reads: This standard specifies the mechanical oil extraction systems, oil gathering systems, water systems, polymer injection system for raw oil distribution system and boiler Production systems and energy monitoring project of major energy-consuming equipment and index requirements, energy monitoring inspection and testing methods and results of the evaluation.
This standard applies to mechanical oil extraction systems, raw crude oil gathering and transportation systems, water systems, polymer injection system, power supply and distribution systems, boilers, etc. Energy monitoring production systems and major energy-consuming equipment. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31453-2015
National Standard of the People's Republic of China
- ICS
- 75.010
- Classification
- E 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 monitoring programs and indicators in claim
- 4.1 mechanical lift system
- 4.2 Oil Gathering System
- 4.3 Water Injection System
- 4.4 6 polymer injection system
- 4.5 Distribution System
- 4.6 Boiler
- 4.7 Ground major energy-consuming equipment and systems energy-saving inspection item
- 4.8 new construction, expansion and renovation project energy-saving inspection item
- 5 Energy Conservation Monitoring Test Method
1 Scope
This standard specifies the mechanical oil extraction systems, oil gathering systems, water systems, polymer injection system for raw oil distribution system and boiler
Production systems and energy monitoring project of major energy-consuming equipment and index requirements, energy monitoring inspection and testing methods and results of the evaluation.
This standard applies to mechanical oil extraction systems, raw crude oil gathering and transportation systems, water systems, polymer injection system, power supply and distribution systems, boilers, etc.
Energy monitoring production systems and major energy-consuming equipment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Performance testing procedures GB/T 10180 industrial boilers Thermal
GB/T 15317 coal-fired industrial boilers energy monitoring
GB/T 16664 enterprise distribution system for energy monitoring method
GB 17167 energy use per unit of energy measuring instruments and General Manager
GB 18613 small and medium three-phase asynchronous motor energy efficiency limit value and energy efficiency rating
GB 19762 water pump energy efficiency of limited value and energy conservation evaluation values
GB 20052-phase distribution transformer energy efficiency limit value and energy efficiency rating
GB/T 20901 Petroleum and Petrochemical Industry Energy measuring instruments and management requirements
GB 24500 industrial boiler energy efficiency limit value and energy efficiency rating
GB 24848 Oil Industrial furnace energy efficiency limit value and energy efficiency rating
SY/T 5264 oil production energy consumption test and calculation methods
SY/T 6285 Reservoir Evaluation Method
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Energy monitoring limit
Under standard test conditions, energy-saving equipment or system runtime monitoring indicators to ensure the minimum allowable value, referred to the limit.
3.2 Energy monitoring energy conservation evaluation values
Under standard test conditions, achieve energy-consuming equipment or system monitoring indicators minimum guaranteed value saving operation, referred to energy conservation assessment value.
3.3 Pump outlet valve throttling loss
The ratio of the difference between the effective power of the pump and the pump output power output power and pump outlet valve, expressed as a percentage (the throttling loss).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 31453-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31453-2015
$185.00