GB/T 31378-2015Test method for surface hardness of flat panel display (FPD) polarizing film (English PDF)
平板显示器(FPD)偏光膜表面硬度的测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31378-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 4, 2015
Implementation date
October 1, 2015
Scope
GB/T 31378-2015 is the English-translated version of 平板显示器(FPD)偏光膜表面硬度的测试方法.
GB/T 31378-2015 is the Chinese standard "Test method for surface hardness of flat panel display (FPD) polarizing film". Its scope clause reads: This standard specifies the test method for a flat panel display using a polarizing film surface hardness.
This standard applies to flat panel displays polarizing surface hardness testing. Its clauses include instrument; test sample; test procedure.
Found what you need?
Document preview — GB/T 31378-2015
National Standard of the People's Republic of China
- ICS
- 31.030
- Classification
- L 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Instrument1
- 4 Test Sample1
- 6 Accuracy2
- 7 Test Report2
1 Scope
This standard specifies the test method for a flat panel display using a polarizing film surface hardness.
This standard applies to flat panel displays polarizing surface hardness testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Determination of film hardness ISO 15184 Paints and varnishes Pencil
3 Instrument
Other models test test pencil, sharpener, sandpaper shall comply with the provisions of ISO 15184, ISO 15184 may be the same as prescribed
Instruments, test if the use of other types instruments to be recorded in the test report.
4 test sample
Test samples were cut from the measured polarizing film, the shape and size should meet the test requirements.
5 test procedure
5.1 Environmental conditions
Unless otherwise specified, the test shall be carried out in the following environmental conditions.
a) a temperature of 25 °C ± 5 °C;
b) Humidity RH50% ~ 80%.
5.2 Test Procedure
Pencil test conditions, the sample holder shall comply with ISO 15184 requirements.
Test speed was set to 0.5mm/s ~ 2mm/s, the sliding distance of 5mm ~ 10mm, the number of scratches less than five, the test load
It is set to 4.9N ± 0.1N tested. Other models of test equipment operation in accordance with ISO 15184 regulations.
If the test sample surface scratches not appear in the test area is not repeated tests, replace the high hardness of the pencil until at least
3mm long scratches up.
If the test sample surface has more than 3mm long scratches occur, reduce the hardness test pencil repeated until more than 3mm long
Scratches no longer occurs.
To the surface of the test sample so that no 3mm and hardest pencil scratch hardness than the hardness of the test samples indicated. Parallel testing […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31378-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31378-2015
$85.00