GB/T 31236-2014Specification for 1000kV transmission line protection equipment (English PDF)
1000kV线路保护装置技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31236-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2014
Implementation date
April 1, 2015
Scope
GB/T 31236-2014 is the English-translated version of 1000kV线路保护装置技术要求.
GB/T 31236-2014 is the Chinese standard "Specification for 1000kV transmission line protection equipment". Its scope clause reads: This standard specifies the basic technical requirements for protection devices UHV transmission lines, test methods, inspection rules and to signs, packaging, Transportation and storage requirements.
This standard applies to 1000kV transmission protection device (hereinafter referred to as the device) line, such as a means of scientific research, design, manufacture, Inspection and application basis.
Found what you need?
Document preview — GB/T 31236-2014
National Standard of the People's Republic of China
- ICS
- 29.240
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 2 Technical Requirements
- 5 Test methods
- 6 Inspection Rules
- 7 signs, packaging, transportation and storage
- 8 Other
1 Scope
This standard specifies the basic technical requirements for protection devices UHV transmission lines, test methods, inspection rules and to signs, packaging,
Transportation and storage requirements.
This standard applies to 1000kV transmission protection device (hereinafter referred to as the device) line, such as a means of scientific research, design, manufacture,
Inspection and application basis.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2887-2011 General specification for computer sites
GB/T 2900.17 Electrotechnical terminology measuring relays
GB/T 2900.49 Electrotechnical terminology - Power System Protection
Basic testing method GB/T 7261-2008 protection and automatic safety devices
GB/T 7268-2005 secondary circuit of power system control and protection devices with plug and plug-in panel box basic size series
GB/T 9361-2011 computer site security requirements
GB/T 11287-2000 Electrical relays - Part 21. Measuring relays and protection equipment vibration, shock, bump and seismic
Test Section 1. Vibration tests (sinusoidal)
GB/T 14285 Technical Specification for automatic protection and safety devices
GB/T 14537-1993 and measure impact crash tests relays and protection equipment
GB/T 14598.9-2010 metric Part 22-3 relays and protection equipment. Electrical disturbance tests --- radiated electromagnetic field disturbance test
GB/T 14598.10-2012 Electrical relays - Part 22-4. Electrical measuring relays and protection equipment disturbance tests ---
Electrical fast transient/burst immunity test
GB/T 14598.13-2008 Electrical relays - Part 22-1. Electrical disturbance tests measure relays and protection equipment
1MHz burst immunity test
GB/T 14598.14-2010 measure electrical disturbance tests for measuring relays and protection equipment Part 2. Electrostatic discharge tests
GB/T 14598.16-2002 Electrical relays - Part 25. Electromagnetic emission tests for measuring relays and protection equipment
GB/T 14598.17-2005 Electrical relays - Part 22-6. Electrical relays and protection equipment disturbance tests ---
RF field induced immunity to conducted disturbances
GB/T 14598.18-2012 measuring relays and protection equipment - Part 22-5. Electrical disturbance tests - Surge immunity test
GB/T 14598.19-2007 Electrical relays - Part 22-7. Electrical measuring relays and protection equipment disturbance tests ---
Power frequency immunity tests
GB 14598.27-2008 metric Part 27 relays and protection equipment. Product safety requirements […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31236-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31236-2014
$235.00