GB/T 31050-2014Energy efficiency test methods for metallurgy cranes (English PDF)
冶金起重机能效测试方法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31050-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 22, 2014
Implementation date
June 1, 2015
Scope
GB/T 31050-2014 is the English-translated version of 冶金起重机能效测试方法.
GB/T 31050-2014 is the Chinese standard "Energy efficiency test methods for metallurgy cranes". Its scope clause reads: This standard specifies the energy efficiency test method metallurgical crane.
This standard applies to JB/T 7688 (all parts) specified metallurgical cranes (hereinafter referred to as the crane), other power-driven bridge You can also refer to the use of cranes. Its clauses include terms and definitions; test conditions.
Found what you need?
Document preview — GB/T 31050-2014
National Standard of the People's Republic of China
- ICS
- 53.020.20
- Classification
- J 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Test Conditions
1 Scope
This standard specifies the energy efficiency test method metallurgical crane.
This standard applies to JB/T 7688 (all parts) specified metallurgical cranes (hereinafter referred to as the crane), other power-driven bridge
You can also refer to the use of cranes.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 6974.1 crane terminology - Part 1. General terms
3 Terms and Definitions
GB/T 6974.1 and define the following terms and definitions apply to this document.
3.1 Supplying energy
Crane according to test method requirements to complete a test cycle, the actual power consumed.
3.2 Effective energy nominal value
When the crane to complete a test cycle according to test method requirements, effective energy provided.
3.3 Energy efficiency of nominal value
When the crane to complete a test cycle according to test method requirements, the nominal value of the effective energy supply and energy ratio.
4 Test Conditions
4.1 Prototype testing requirements
Prototype test qualified products should normally be used.
4.2 Test environment requirements
Crane test environment should be under the corresponding product standards for working conditions, and shall meet the following requirements.
a) wind speed should be less than 3m/s;
b) an ambient temperature of 20 °C ~ 40 °C;
c) test load mass with a predetermined value of deviation should not exceed ± 5%, when the arbitration test deviation should not exceed ± 1%; and test load hanging
With mass accuracy of ± 1%;
d) power supply system crane feeder line access at the rated voltage fluctuations should not exceed ± 10%, three-phase voltage unbalance rate is not
Should be greater than 1.5%;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31050-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31050-2014
$235.00