Valid

GB/T 31038-2014General technical condition for high voltage diesel-generating sets (English PDF)

高电压柴油发电机组通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31038-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 5, 2014

Implementation date

July 1, 2015

Scope

GB/T 31038-2014 is the English-translated version of 高电压柴油发电机组通用技术条件.

GB/T 31038-2014 is the Chinese standard "General technical condition for high voltage diesel-generating sets".

Its scope clause reads: This standard specifies the reciprocating diesel engine driven alternator group (hereinafter referred to as units) of the basic parameters, technical requirements, test side Method, inspection rules and signs, packaging, transportation and storage.

This standard applies to the output voltage level at 1kV ~ 11kV, power output of not less than 100kW, rated power factor 0.8 (lag After), rated frequency of 50Hz units. 60Hz AC generators can refer to use.

Found what you need?

Document preview — GB/T 31038-2014

National Standard of the People's Republic of China

ICS: 29.160.40
Classification: K 52

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 2 Technical Requirements
4.1 General
4.2 Parameter requirements
4.3 indicating device
4.4 Use of environmental conditions
4.5 Run
4.6 performance levels and power rating Category
4.7 electrical performance
4.8 High-voltage switchgear
4.9 polluted the limits
4.10 fuel consumption and oil consumption
4.11 Mechanical Performance
4.12 Security
4.13 protective measures
4.15 appearance quality
4.16 Complete Set
4.17 Dimensions
4.18 Quality
4.19 Structure
5 13 test items and test methods
5.1 Testing and Instrumentation
5.2 Test items and test methods
6 Inspection Rules
6.1 Inspection classification
6.2 Test conditions
7 signs, packaging and storage

1 Scope

This standard specifies the reciprocating diesel engine driven alternator group (hereinafter referred to as units) of the basic parameters, technical requirements, test side

Method, inspection rules and signs, packaging, transportation and storage.

This standard applies to the output voltage level at 1kV ~ 11kV, power output of not less than 100kW, rated power factor 0.8 (lag

After), rated frequency of 50Hz units. 60Hz AC generators can refer to use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 146.1 standard gauge railway rolling stock clearance

GB 146.2 standard gauge railway construction clearance

GB 311.1-2012 insulation coordination - Part 1. Definitions, principles and rules

GB 755-2008 rotating motor fixed and performance

GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test J and guidance. Mould growth

GB/T 2820.1-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 1. Application, ratings and performance

GB/T 2820.4-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 4. Control and switchgear

GB/T 2820.5-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 5. Generator

GB/T 2820.6-2009 Reciprocating internal combustion engine driven alternating current generating sets - Part 6. Test methods

GB/T 2820.10-2002 Reciprocating internal combustion engine driven alternating current generating sets - Part 10. Measurement of noise (enveloping surface method)

GB/T 2820.12-2002 Reciprocating internal combustion engine driven alternating current generating sets - Part 12. Emergency power supply to safety devices

GB/T 2900.20-1994 Electrotechnical terminology voltage switchgear

GB 3906-2006 3.6kV ~ 40.5kV AC metal-enclosed switchgear and control equipment

GB/T 6072.1-2008 Reciprocating internal combustion engines - Part 1. Power, calibration and testing of fuel and lubricating oil consumptions

Additional requirements for engines for general method

GB/T 7354-2003 partial discharge measurement

GB/T 11022-2011 common technical requirements for high-voltage switchgear and control equipment standards

GB/T 13306 signs

GB 14711-2013 sized rotary motor General safety requirements

GB/T 16927.1-2011 high voltage test techniques - Part 1. General definitions and test requirements

GB/T 20136-2006 internal combustion engine power plant Common test methods

By GB/T 26218.1-2010 Insulators filthy conditions selection and sizing - Part 1. Definitions, information

And general principles

GB 50169-2006 electric equipment installation engineering construction and acceptance of grounding devices

JB/T 8194 combustion engine power plant terminology

JB/T 10303-2001 power frequency diesel generator set technical conditions […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

GB/T 47838.1-2026|GB/T 47838.3-2026|GB/T 28570-2025|GB/T 44296-2024|GB/T 44300-2024|GB/T 30370-2022

How to Download GB/T 31038-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.