GB/T 30745-2014Gradation and classification on sea area (English PDF)
海域分等定级
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30745-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 27, 2014
Implementation date
October 1, 2014
Scope
GB/T 30745-2014 is the English-translated version of 海域分等定级.
GB/T 30745-2014 is the Chinese standard "Gradation and classification on sea area".
Its scope clause reads: This standard specifies the waters under the jurisdiction of the People's Republic of China classification and grading factors selection, technical methods, survey data and organize, to FIG fruit preparation, reporting, biography compilation, archiving and updating outcomes.
This standard applies to waters under the jurisdiction of the People's Republic of China Classification Gradation and work. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30745-2014
National Standard of the People's Republic of China
- ICS
- 07.060
- Classification
- A 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 4.1 Grading Grading objects waters
- 4.2 Grading Grading Principle 2 waters
- 4.3 Grading Grading procedures waters
- 5.1 Grading Factors waters
- 5.2 Grading Factors waters
- 6 Classification Classification Method 3 waters
- 6.1 Grading Grading unit determines
- 6.2 influencing factors normalized
- 6.3 Factors Affecting index weights
- 6.4 Factors Affecting score calculation method
- 6.6 sea, etc. (grade) division
- 7 data Survey and finishing
- 7.1 Data Requirements Survey
- 7.2 data compilation claim
- 8 Sea grading (grading) maps prepared
- 8.1 basemap
- 8.3 sea, etc. (grade) do not
- 9 Sea Classification Gradation and report preparation and compilation of basic data
- 10 Sea grading (grading) archive and update the results of
- 10.1 Sea grading (grading) Result
- 10.2 outcomes update mode
- 10.3 Archiving and outcome of the updated application
- Appendix A (informative) Classification and Gradation Index System of waters
- Appendix B (normative) waters classification (grading) factor weights Questionnaire
1 Scope
This standard specifies the waters under the jurisdiction of the People's Republic of China classification and grading factors selection, technical methods, survey data and organize, to
FIG fruit preparation, reporting, biography compilation, archiving and updating outcomes.
This standard applies to waters under the jurisdiction of the People's Republic of China Classification Gradation and work.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
HY/T 124-2009 Specification sea cadastral survey
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Sea grading gradationonseaarea
According to the comprehensive analysis of the impact of various factors waters of efficiency in the use of economic, social, natural, etc., reveal regional differences waters of use value,
Using qualitative and quantitative method of combining the general quality level of national waters Grades.
3.2 Sea grading classificationonseaarea
On the basis of the coastal county-level administrative regions on marine function zoning, depending on sea location, natural conditions, abundance of resources, environmental quality and week
Edge social factors, economic conditions, the use of county-level administrative jurisdiction of the types of sea area use the value of a comprehensive assessment, and evaluation results level
Do oriented.
Note. The county marine function zoning coastal county-level administrative units did not develop, step by step with reference to the marine function zoning an approved. Sea level in the order of the county
Sorting inside Unity (cities, districts) range.
3.3 Grading unit unitforgradation
Sea grading index calculation of basic spatial units.
Note. The county-level administrative region under the jurisdiction of coastal waters as a sequential classification unit, waters and other nationwide unified arrangement, each comprising a number of economic development, etc.
Horizontal, marine resources and environmental conditions similar to those counties (cities, districts).
3.4 Grading unit unitforclassification
Sea Grading Index Calculation of basic spatial units.
Note. the cell boundary or ownership boundaries on a basemap linear boundary composition, relatively homogeneous unit within the waters level of quality, significant differences between the characteristics of the sea unit.
3.5 Weight
Reflecting the impact of factors waters, etc. (grade) do not division.
Note. The size is proportional to the weight value of benefits affected by the use of the waters, values between 0 and 1, each selected factor weights sum to 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30745-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30745-2014
$345.00