GB/T 30436-2013Hydrostatical balance (English PDF)
静水力学天平
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30436-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
August 1, 2014
Scope
GB/T 30436-2013 is the English-translated version of 静水力学天平.
GB/T 30436-2013 is the Chinese standard "Hydrostatical balance". Its scope clause reads: This standard specifies the classification and basic parameters of hydrostatic balance, requirements, test methods, inspection rules, logo and packaging, transportation, Storage.
This standard applies to the principle according to Archimedes' principle, measuring the difference between the mass of the analyte in the air quality and immersed in water, obtained by Volume was measured to calculate the density of the measured object (density > 1g/cm3) of hydrostatic balance (hereinafter referred to as the balance). Its clauses include classification and basic parameters.
Found what you need?
Document preview — GB/T 30436-2013
National Standard of the People's Republic of China
- Classification
- N 61
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification and basic parameters
- 3.1 Classification
- 3.2 Basic parameters
1 Scope
This standard specifies the classification and basic parameters of hydrostatic balance, requirements, test methods, inspection rules, logo and packaging, transportation,
Storage.
This standard applies to the principle according to Archimedes' principle, measuring the difference between the mass of the analyte in the air quality and immersed in water, obtained by
Volume was measured to calculate the density of the measured object (density > 1g/cm3) of hydrostatic balance (hereinafter referred to as the balance).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 packaging and storing the flag icon
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 9969-2008 General Industrial Product Manual
GB/T 11606-2007 analytical instruments environmental test methods
JJG98-2006 mechanical inspection of balance
JJG1036-2008 inspection of electronic balance
3 Classification and basic parameters
3.1 Classification
The balance is divided into electronic and mechanical balance balance two categories.
3.2 Basic parameters
3.2.1 actual scale
Expressed in units of mass balance of the difference between two adjacent values shown for the actual scale of the balance, by d.
3.2.2 verification scale
Value of the verification scale value expressed in units of mass balance for the division level metering and verification, represented by e. It is advisable
In the form of 1 × 10k or 2 × 10k or 5 × 10k, where, k is a positive integer, negative integer or zero.
3.2.3 d and e are predetermined
In addition to meeting the above requirements, the electronic balance d<=e<=10d; In general, e shall comply with. e = 10kkg, where k is a positive
Negative whole number or zero. Mechanical scales e = d.
3.2.4 verification scale intervals
Than the maximum capacity and the verification scale interval of the balance of verification scale intervals, represented by n.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 30436-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30436-2013
$195.00