Valid

GB/T 32708-2016Safety requirements for laboratory instrument and equipment—Autoclave (English PDF)

实验室仪器及设备安全规范反应釜

Preview PDF

This is a limited preview

Buy now to download the full PDF (37 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32708-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 14, 2016

Implementation date

January 1, 2017

Scope

GB/T 32708-2016 is the English-translated version of 实验室仪器及设备安全规范反应釜.

GB/T 32708-2016 is the Chinese standard "Safety requirements for laboratory instrument and equipment—Autoclave". Its scope clause reads: This standard specifies normal and extended environmental conditions (see Appendix A), safety requirements for laboratory reactors (excluding glass reactions Kettle safety requirements).

This standard also specifies the means by which inspection and type tests to determine whether the equipment complies with the requirements of this standard. This standard applies to the geometric volume of less than 25L, the design pressure of not more than 35MPa of the reactor. Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 32708-2016

National Standard of the People's Republic of China

ICS: 71.120.10
Classification: N 61

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 normative reference document
3 Terms and definitions
4 Test
5 logo and document
6 anti-shock
7 Anti-mechanical hazards
8 Resistance to mechanical shock and impact
9 to prevent the spread of flame
10 Equipment temperature limits and heat resistance
11 Risk of fluid protection
12 components
Appendix A (normative) Environmental conditions
Appendix B (Normative Appendix) Routine Tests
Appendix C (normative) specifies the components required for insulation
Appendix D (normative) Reduced pollution levels
Appendix E (Normative Appendix) Measurement of Clearances and Creepage distances

1 Scope

This standard specifies normal and extended environmental conditions (see Appendix A), safety requirements for laboratory reactors (excluding glass reactions

Kettle safety requirements). This standard also specifies the means by which inspection and type tests to determine whether the equipment complies with the requirements of this standard.

This standard applies to the geometric volume of less than 25L, the design pressure of not more than 35MPa of the reactor.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Determination of softening temperature (VST) of thermoplastics GB/T 1633-2000

GB/T 4207-2012 Determination of resistance to traceability and comparison of electrical traces for solid insulation materials

GB 4208 enclosure protection class (IP code)

GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements

GB 5013 (all parts) Rated voltage 450V/750V and below rubber insulated cable

GB 5023 (all parts) Rated voltage 450V/750V and below PVC insulated cables

GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flame 50W Horizontal and vertical fire

Flame test method

Graphical symbols for use in electrical equipment - Part 2. Graphical symbols ISO /TS 545 Technical Corrigendum

Safety requirements for audio, video and similar electronic equipment GB 8898

Electrical insulation - Heat resistance and presentation method GB/T 11021-2014

Industrial plugs and couplings - Part 1. General requirements GB/T 11918.1-2014

GB/T 11918.2-2014 Industrial plugs and receptacles - Part 2. Dimensions of electrical accessories with bolts and insert

Capacity and interchangeability requirements

Safety requirements for safety valves GB/T 12241-2005

Low - voltage switchgear and controlgear - Part 1. General

GB 14048.3-2008 Low - voltage switchgear and controlgear - Part 3. Switches, isolators, disconnectors and fuses

Electrician

Electrical accessories - Wire assemblies and interconnecting wire assemblies GB/T Low - voltage electrical installations - Part 4-44. Safety - protection - Voltage harassment and electromagnetic harassment protection GB/T 16895.10-2010

GB/T 16927 (all parts) High voltage test technology

GB/T 16935.3-2005 Insulation coordination of equipment in low pressure systems - Part 3. Antifouling using coatings, tanks and molding protection

GB 17465 (all parts) appliance couplings for household and similar purposes

ISO 3864-1..2011 Graphical symbols - Safety colors and safety signs - Part 1. Safety signs and safety markings - Design principles (Graphicalsymbols-Safetycoloursandsafetysigns-Part 1. Designprinciplesforsafetysignsand safetymarkings

ISO 7000..2004 Graphical symbols for equipment and a list (Graphicalsymbolsforuseonequipment-

Indexandsynopsis) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.

Similar standards

GB/T 47183-2026|GB/T 9842-2018|GB/T 13577-2026|GB/T 13578-2026|GB/T 151-2026|GB/T 25155-2026

How to Download GB/T 32708-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.