Valid

GB/T 30289.1-2013Network-based data updating specification for navigation electronic map-Part 1: Incremental update mode for the on-board compiling (English PDF)

基于网络传输的导航电子地图数据更新规范 第1部分:应用于车载终端编译的增量更新模式

Preview PDF

This is a limited preview

Buy now to download the full PDF (108 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30289.1-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2013

Implementation date

July 15, 2014

Scope

GB/T 30289.1-2013 is the English-translated version of 基于网络传输的导航电子地图数据更新规范 第1部分:应用于车载终端编译的增量更新模式.

GB/T 30289.1-2013 is the Chinese standard "Network-based data updating specification for navigation electronic map-Part 1: Incremental update mode for the on-board compiling".

Its scope clause reads: GB/T 30289 provisions of this part of the navigation electronic map incremental updating mechanism, incremental data transfer protocol, local data storage format , Incremental data storage format, and update local data.

This section applies to an incremental navigation electronic map data and local data transmission network resulting from the combination formed by the compiler for car Physical storage format used by the navigation application software mode. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 30289.1-2013

National Standard of the People's Republic of China

ICS
33.200
Classification
M 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Symbols and abbreviations
  • 4.1 Symbols
  • 4.2 Abbreviations
  • 5 navigation electronic map incremental updating mechanism
  • 5.1 Field Data Type
  • 5.1.1 Types of natural numbers (N)
  • 5.1.2 integer type (I)
  • 5.1.3 character type (C)
  • 5.1.4 string type (CC)
  • 5.1.5 Bit type (B)
  • 5.1.6 normalized coordinates (NZ)
  • 5.1.7 coordinate type (PID)
  • 5.1.8 BCD code (BCD)
  • 5.1.9 variable-length data length of
  • 5.1.10 uncertain address offset
  • 5.2 file storage format instructions
  • 5.2.1 Data Item Description
  • 5.2.2 Bit Field Description
  • 5.2.3 Code table illustrates
  • 5.2.4 Field Type Description 7 physical storage byte order
  • 5.4.1 Road
  • 5.4.2 Background
  • 5.4.3 Notes
  • 5.4.4 Extended data nodes
  • 5.4.5 road extension data
  • 5.4.6 POI data
  • 6 incremental data transfer protocol
  • 6.1 Basic requirements
  • 6.2 IDTP timeout and addressing
  • 6.3 transmission procedure
  • 6.3.1 Overall incremental data transfer protocols
  • 6.3.2 Authentication procedure
  • 6.3.3 Data Update procedure
  • 6.3.4 Data transfer protocols
  • 6.3.5 Data transfer protocol error
  • 6.3.6 Data updated procedures
  • 6.4 packet format
  • 6.4.1 transport packet structure definition
  • 6.4.2 authentication packet
  • 6.4.3 Data Packet
  • 6.4.4 data transport packets
  • 6.4.5 updated data packets
  • 7 local data storage format
  • 7.1 Logic Model
  • 7.1.1 Data Model Block
  • 7.1.2 Background data
  • 7.1.3 Note on data
  • 7.1.4 Road network data model
  • 7.1.5 path planning area box data model
  • 7.1.6 Extended Data Model
  • 7.2 storage model
  • 7.2.1 file storage model
  • 7.2.2 Global data file storage model
  • 7.2.3 Data storage model block
  • 7.3 Global Data Management
  • 7.3.1 Data Management
  • 7.3.2 road name data
  • 7.3.3 Route ID data
  • 7.3.4 Data traffic rules
  • 7.3.5 path planning area box data
  • 7.4 Data
  • 7.4.1 Data Block Management
  • 7.4.2 Road network management data
  • 7.4.3 Background data management
  • 7.4.4 Notes on data management
  • 7.4.5 Extended Data Management
  • 7.5 The basic data network
  • 7.5.1 Data Management
  • 7.5.2 node data
  • 7.5.3 road attribute data
  • 7.5.4 road shape data
  • 7.5.5 road link data
  • 7.5.6 junction 53 permanent ID data
  • 7.5.7 arc permanent ID data
  • 7.5.8 arc segment sequence data
  • 7.6 Expansion of road network data
  • 7.6.1 Extended data node
  • 7.6.2 road extension data
  • 7.7 Background data
  • 7.7.1 Background data management data
  • 7.7.2 Background data

1 Scope

GB/T 30289 provisions of this part of the navigation electronic map incremental updating mechanism, incremental data transfer protocol, local data storage format , Incremental data storage format, and update local data.

This section applies to an incremental navigation electronic map data and local data transmission network resulting from the combination formed by the compiler for car

Physical storage format used by the navigation application software mode.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 28442-2012 navigation electronic map data classification and coding

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 File

Application Management is the basic unit of data on the storage media.

3.2 Record

One or more related fields of the structure.

3.3 Management data

Descriptions of the data subject and used to access management data, including data indexing and data dictionary.

3.4 Floor level

Spatial index by the same management, the same classification and the data content level of detail consistent data collection.

3.5 Block

Of layer data generated by dividing the data block.

Note. The size of each block of 4 × 4 corresponding grid.

3.6 Grid parcel

The basic unit geospatial database partition from the southernmost latitude, the northernmost and westernmost warp weft, warp the easternmost […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 108 pages — is available in the English PDF.

Similar standards

How to Download GB/T 30289.1-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
108 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30289.1-2013

$1,850.00