GB/T 30269.809-2020Information technology—Sensor networks—Part 809: Testing: Conformance testing for the network layer of wireless sensor networks based on IP protocol (English PDF)
信息技术 传感器网络 第809部分:测试:基于IP的无线传感器网络网络层协议一致性测试
This is a limited preview
Buy now to download the full PDF (92 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30269.809-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 2, 2020
Implementation date
January 1, 2021
Scope
GB/T 30269.809-2020 is the English-translated version of 信息技术 传感器网络 第809部分:测试:基于IP的无线传感器网络网络层协议一致性测试.
GB/T 30269.809-2020 is part 809 of the Chinese national sensor network series and holds the conformance tests for the network layer protocol that GB/T 30269.303-2018 defines for IP-based wireless sensor networks.
It first describes the test topology, in which the device under test acts as node under test or router under test beside reference nodes already shown to conform, then gives the frame format tests, the node behaviour tests and the router behaviour tests as individual cases.
Implementation conformance statements follow GB/T 17178.7-2011 and the general testing rules come from GB/T 30269.801-2017. Test laboratories and manufacturers use it on products or systems that claim to comply with GB/T 30269.303-2018. Issued on 2 June 2020, it has applied since 1 January 2021.
Found what you need?
Document preview — GB/T 30269.809-2020
National Standard of the People's Republic of China
- ICS
- 35.110
- Classification
- L 79
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Abbreviations
- 5 Overview
- 6 Frame format test
- 7 Node behavior test
- 8 Router behavior test
- References
Foreword
GB/T 30269 "Information Technology Sensor Network" is planned to be divided into the following parts.
---Part 1: Reference architecture and general technical requirements;
---Part 2: Terminology;
---Part 301: Communication and Information Exchange. Low-speed wireless sensor network network layer and application support sub-layer specification;
---Part 302: Communication and Information Exchange. High-reliability wireless sensor network media access control and physical layer specification;
---Part 303: Communication and Information Exchange. IP-based wireless sensor network network layer specification;
---Part 304: Communication and Information Exchange. Technical Requirements for Acoustic Communication Systems;
---Part 401: Collaborative Information Processing. Services and interfaces that support collaborative information processing;
---Part 501: Identification. Rules for preparing sensor node identifiers;
---Part 502: Identification. Resolution of sensor node identifiers;
---Part 503: Identification. sensor node identifier registration procedures;
---Part 504: Identification. Sensor node identifier management;
---Part 601: Information Security. General Technical Specifications;
---Part 602: Information Security. Low-rate wireless sensor network network layer and application support sub-layer security specifications;
---Part 701: Sensor interface. signal interface;
---Part 702: Sensor interface. data interface;
---Part 801: Test. General requirements;
---Part 802: Test. Low-speed wireless sensor network media access control and physical layer;
---Part 803: Test. Low-speed wireless sensor network network layer and application support sublayer;
---Part 804: Test. Sensor Interface;
---Part 805: Test. Sensor Gateway Test Specification;
---Part 806: Testing. Coding and parsing of sensor node identifiers;
---Part 807: Test. Network Transmission Security;
---Part 808: Test. Low-rate wireless sensor network network layer and application support sub-layer security;
---Part 809: Test. IP-based wireless sensor network network layer protocol conformance test;
---Part 901: Gateway. General technical requirements;
---Part 902: Gateway. Technical requirements for remote management;
---Part 903: Gateway. Logical Interface;
---Part 1001: Middleware. Sensor Network Node Interface.
This part is Part 809 of GB/T 30269.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
Please note that certain contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.
1 Scope
This part of GB/T 30269 specifies the frame format test, based on the IP-based wireless sensor network network layer protocol defined in GB/T 30269.303-2018, Node behavior testing and routing behavior testing methods.
This part is applicable to the protocol compliance test on the network layer of the product or system communication protocol that claims to comply with GB/T 30269.303-2018.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 17178.7-2011 Information Technology Open System Interconnection Conformance Test Method and Framework Part 7: Achieve Consistency Sex statement
GB/T 30269.303-2018 Information Technology Sensor Network Part 303: Communication and Information Exchange. IP-based Wireless Sensor network network layer specification
GB/T 30269.801-2017 Information Technology Sensor Network Part 801: Testing. General Requirements
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Unicast
A method of communication that sends a message to a single device in the network. [GB/T 30269.301-2014, definition 3.41]
3.2 Implementation conformance statement
Declaration of compliance.
An implementation or system ICS that claims to be consistent with a given protocol specification. [GB/T 17178.1-1997, definition 3.3.80]
3.3 Node under test
The terminal node where the tested item is located.
3.4 Frame
The format of several bits from the media access control (MAC) sublayer that is sent together on time. [GB/T 15629.15-2010, definition 3.14]
4 Abbreviations
The following abbreviations apply to this document.
5 Overview
5.1 Test topology
This section provides protocol compliance testing methods for the network layer specified in GB/T 30269.303-2018.
This part uses the form of diagram to describe the device role and wireless communication relationship of the test case, as shown in Figure 1. The shaded solid circle in the figure represents The device under test (DUT) can be the node under test (NUT) or the router under test (RUT); the solid circle without shading represents the reference node (RN), It is a device that has been certified to comply with GB/T 30269.303-2018; the dotted line between the devices indicates the wireless communication range of the device) 1), such as If two or more devices are in this area, it means that they can send and receive data to each other in this area.
1) The communication range involved in this section refers to wireless communication between devices in this area without routing.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 92 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 17178.7-2011Information technology -- Open systems interconnection -- Conformance testing methodology and framework -- Part 7: Implementation conformance statements
- GB/T 30269.303-2018Information technology—Sensor networks—Part 303: Communication and information exchange: Network layer specification for wireless sensor networks based on IP protocol
- GB/T 30269.801-2017Information technology—Sensor networks—Part 801: Testing: General requirements
Similar standards
How to Download GB/T 30269.809-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17178.7-2011 — Information technology -- Open systems interconnection -- Conformance testing methodology and framework -- Part 7: Implementation conformance statements
GB/T 30269.303-2018 — Information technology—Sensor networks—Part 303: Communication and information exchange: Network layer specification for wireless sensor networks based on IP protocol
GB/T 30269.801-2017 — Information technology—Sensor networks—Part 801: Testing: General requirements
Secure payment via Stripe
Payments accepted
GB/T 30269.809-2020
$1,175.00