Valid

GB/T 30269.801-2017Information technology—Sensor networks—Part 801: Testing: General requirements (English PDF)

信息技术 传感器网络 第801部分:测试:通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30269.801-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

December 29, 2017

Scope

GB/T 30269.801-2017 is the English-translated version of 信息技术 传感器网络 第801部分:测试:通用要求.

GB/T 30269.801-2017 sets the general requirements for testing sensor network equipment and systems. It gives the basic classification of the tests, separating protocol conformance testing from interoperability testing, the test structure, what a test specification must contain, and the structure, naming, numbering and content of a test case.

It also covers the conformance statement of the device under test and the general requirements for the test log and the test report, and two annexes give a test case template and a test log template.

It defines the implementation under test (IUT), the device under test (DUT) and conformance testing, and lists the abbreviations DUT, ICS, IUT, SCS and SUT. It cites GB/T 17178.1-1997 and GB/T 17178.7-2011. Part 801 of GB/T 30269 was issued and has applied since 29 December 2017.

Found what you need?

Document preview — GB/T 30269.801-2017

National Standard of the People's Republic of China

ICS
35.110
Classification
L 79

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Abbreviations
  • 5 Overview
  • 6 Test Structure
  • 7 Test Category
  • 7.1 Protocol Conformance Test
  • 7.2 Interoperability Test
  • 8 Test Specification Requirements
  • 9 Test Example Requirements
  • 9.1 Structure Requirements
  • 9.2 Name and Numbering Requirements
  • 9.3 Content Requirements
  • 10 Claim
  • 11 Test Log Requirements
  • 12 Test Report Requirements
  • Appendix A (Informative) Test Example Template
  • Appendix B (Informative) Test Log Template

Foreword

GB/T 30269 "Information Technology Sensor Networks" is intended to be divided into the following sections.

--- Part 1. Reference Architecture and General Technical Requirements;

--- Part 2. Terminology;

--- Part 301. Communication and Information Exchange. Low-speed wireless sensor network layer and application support sublayer specification;

--- Part 302. Communication and Information Exchange. Wireless Sensor Networks for High-Reliability Applications Media Access Control and Physical Layer Specifications;

--- Part 303. Communication and information exchange. IP-based wireless sensor network layer technical specifications;

--- Part 304. Communication and information exchange. Video-oriented media access control layer and physical layer specifications;

--- Part 305. Communication and information exchange. Specification for ultrasonic communication protocols;

--- Part 401. Collaborative information processing. Services and interfaces supporting collaborative information processing;

--- Part 501. Identification. Rules for the preparation of sensor node identifiers;

--- Part 502. Identification. Sensing node resolution and management specifications;

--- Part 503. Identification. Sensor node identifier registration procedures;

--- Part 504. Identification. Specification for sensor node identifiers;

--- Section 601. Information Security. General Technical Specifications;

--- Part 602. Information Security. Low-Rate Wireless Sensor Networks Network Layer and Application Support Sublayer Security Specifications;

--- Part 701. Sensor Interface. Signal Interface;

--- Part 702. Sensor Interface. Data Interface;

--- Part 801. Testing. General requirements;

--- Part 802. Testing. Media access control and physical layer for low-speed wireless sensor networks;

--- Part 803. Testing. Low-speed wireless sensor network network layer and application support sublayer;

--- Part 804. Test. Sensor Interface;

--- Part 805. Testing. Sensor network gateways;

--- Part 806. Test. Sensor Node Identifier;

--- Part 807. Testing. Network Transport Security;

--- Part 808. Testing. Low-rate wireless sensor network layer and application support sublayer security;

--- Part 901. Gateways. General technical requirements;

--- Part 902. Gateways. Technical requirements for remote management;

--- Part 903. Gateways. Logical Function Interface Specification;

--- Part 1001. Middleware. Sensor Network Node Interface.

This section is Part 801 of GB/T 30269.

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 30269 defines the basic classification of the sensor network test, the composition of the test specification, the structure of the test case, and the measured The device's declaration file and general requirements for test logs and test reports.

This section applies to sensor network equipment and system testing.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.

GB/T 17178.1-1997 Information technology open systems interconnection conformance testing methods and frameworks. Part 1. Basic concepts

GB/T 17178.7-2011 Information Technology Open System Interconnection Conformance Test Method and Framework Part 7: Achieve Consistent Sexual statement

3 Terms and Definitions

The terms and definitions defined in GB/T 17178.1-1997 and the following terms apply to this document. For ease of use, the following is repeated Some terms and definitions of GB/T 17178.1-1997.

3.1 Measured to achieve implementationundertest; IUT

An implementation of one or more protocols that will be studied as part of the system through testing.

3.2 Device under test deviceundertest; DUT

The device on which the IUT is located.

3.3 Conformance testing

The test IUT is the degree to which a consistent implementation has been achieved.

[GB/T 17178.1-1997, definition 3.3.23]

4 Abbreviations

The following abbreviations apply to this document.

DUT: Device Under Test

ICS: Implementation Conformance Statement

IUT: Implementation Under Test

SCS: System Conformance Statement

SUT: System Under Test

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 30269.801-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30269.801-2017

$210.00