GB/T 30243-2013Measurement of fluid flow in closed conduits - Specifications for V-cone pressure differential flow measuring device (English PDF)
封闭管道中流体流量的测量 V形内锥流量测量节流装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30243-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
GB/T 30243-2013 is the English-translated version of 封闭管道中流体流量的测量 V形内锥流量测量节流装置.
GB/T 30243-2013 is the Chinese standard "Measurement of fluid flow in closed conduits - Specifications for V-cone pressure differential flow measuring device".
Its scope clause reads: This standard specifies the measurement of fluid flow in a circular cross section of the pipe filled with fluid in the V-Cone flow measurement throttling device is installed (in Hereinafter referred to as V cone) terms, product classification, basic parameters, requirements, test methods, inspection rules, marking, packaging and storage.
This standard applies to the measurement of single-phase flow V cone. This standard does not apply to the measurement of pulsating flow V cone. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30243-2013
National Standard of the People's Republic of China
- ICS
- 17.120.10
- Classification
- N 12
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 measurement principle
- 5.1 Categories
- 5.2 Basic parameters
- 6.1 Properties of the fluid
- 6.2 Flow State
- 6.3 Installation
- 7 Technical requirements
- 7.1 Basic error limit and repeatability error
- 7.2 Compressive strength
- 7.3 Pressure loss
- 7.4 Appearance
- 8.1 Test equipment and test conditions
- 8.2 Basic and repeatability errors
- 8.3 Compressive strength
- 8.4 Pressure loss
- 8.5 Appearance
- 9 7 inspection rules
- 9.1 factory inspection
- 9.2 Type inspection
- 10 signs, packaging and storage
- 10.1 mark
- 10.2 Packing
- 10.4 Storage
- Appendix A (informative) can be calculated expansion coefficient epsilon
- Appendix B (Informative Appendix) V Cone minimum upstream and downstream straight pipe
- References
1 Scope
This standard specifies the measurement of fluid flow in a circular cross section of the pipe filled with fluid in the V-Cone flow measurement throttling device is installed (in
Hereinafter referred to as V cone) terms, product classification, basic parameters, requirements, test methods, inspection rules, marking, packaging and storage.
This standard applies to the measurement of single-phase flow V cone.
This standard does not apply to the measurement of pulsating flow V cone.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 2624.1-2006 with the differential pressure measuring device mounted to round pipe full pipe fluid flow - Part 1. General
Principles and requirements
GB/T 13384 mechanical and electrical products packaging General technical conditions
GB/T 17611-1998 terminology and symbols enclosed measuring fluid flow in the pipeline
GB/T 22133-2008 Measurement of fluid flow meter performance presentation method
ISO /T R3313.1998 closed conduits impact (Measurement of fluid flow measuring pulsating flow of flow measuring instruments offluidflowinclosedconduits-Guidelinesontheeffectsofflowpulsationsonflow-measurementin- struments)
3 Terms and Definitions
GB/T 2624.1-2006, GB/T 17611-1998 and GB/T 22133-2008 define the following terms and definitions apply
In this document.
3.1 V-Cone flow measurement throttling device V-conepressuredifferentialflowmeasuringdevice
Throttle device by the measuring tube, V-shaped cone composition. In the measuring tube, V-shaped cone mounted coaxially fixed measuring tube in
Heart axis. Consists of two V-shaped cone frustum cone having a circular base of the same.
3.2 Equivalent diameter ratio
Diameter ratio of the inner annulus flow area of the largest diameter of the cone V-cone equal to the area of a circle V cone measured upstream pipeline can table
Shown as the formula (1).
beta =
D2-d2 (1) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30243-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30243-2013
$195.00