GB/T 30110-2013Measuring methods of parameters of HgCdTe epilayers used for space infrared detectors (English PDF)
空间红外探测器碲镉汞外延材料参数测试方法
This is a limited preview
Buy now to download the full PDF (26 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30110-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
May 15, 2014
Scope
GB/T 30110-2013 is the English-translated version of 空间红外探测器碲镉汞外延材料参数测试方法.
GB/T 30110-2013 is the Chinese standard "Measuring methods of parameters of HgCdTe epilayers used for space infrared detectors". Its scope clause reads: This standard specifies the space infrared detectors with mercury cadmium telluride (HgCdTe) epitaxial material properties of test methods and test equipment Claim.
This standard applies to space infrared detectors parameter test mercury cadmium telluride epitaxial material, other uses of mercury cadmium telluride epitaxial material parameters Testing can refer to use. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 30110-2013
National Standard of the People's Republic of China
- ICS
- 49.060
- Classification
- H 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols and
- 5 material Parameter Test Method
- 5.1 component to the thickness of the test
- 5.2 8 crystal surface to the test
- 5.3 lattice constant test
- 5.4 surface roughness test
- 5.5 surface roughness test
- 5.6 Materials electrical parameters test
- 5.7 minority carrier lifetime test
- 5.8 dislocation density test
- 5.9 surface defect density test
- 5.10 X-ray double crystal diffraction peak half-width test
- 5.11 X-ray topography test
- 5.12 non-uniform material properties testing
- 6.1 Test conditions
- 6.2 anti-radiation material performance testing
- 7 precision material parameters, precision and uncertainty testing methods
- 8 Test Equipment Requirements
- Annex C (informative) Principle of laser interferometer
- References
1 Scope
This standard specifies the space infrared detectors with mercury cadmium telluride (HgCdTe) epitaxial material properties of test methods and test equipment
Claim.
This standard applies to space infrared detectors parameter test mercury cadmium telluride epitaxial material, other uses of mercury cadmium telluride epitaxial material parameters
Testing can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1553-2009 germanium and silicon minority carrier lifetime measurement - photoconductivity decay
GB/T 1555-2009 Determination of the semiconductor single crystal
GB/T 4326-2006 extrinsic semiconductor single crystals Hall mobility and Hall coefficient measurements
GJB548B-2005 test methods and procedures for microelectronics
Precision GJB1485 physical properties of materials testing methods, accuracy and uncertainty
Quality assurance requirements for measuring equipment GJB2712 Metrological confirmation system
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Substrate
Providing an epitaxial monocrystalline material surface atomic structure periodically arranged.
3.2 Epitaxial material
Single crystal thin film material on a single crystal substrate by a gas and liquid phase growth method, etc. obtained.
3.3 LPE liquidphaseepitaxy; LPE
The semiconductor material dissolved in a solvent, to form a saturated solution, then this solution was coated on a saturated single crystal substrate, lowering the temperature,
Supersaturation, grown on a substrate of semiconductor single crystal thin layer of new technology along the substrate crystal axis direction.
[GB/T 14264-2009, the definition 3.143]
3.4 Molecular beam epitaxy molecularbeamepitaxy; MBE
Under ultra-high vacuum, the substrate is maintained at an appropriate temperature, to one or more bundles of continuous molecule is deposited onto the substrate surface to obtain a thin monocrystalline layer
Process.
[GB/T 14264-2009, the definition 3.161] […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30110-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30110-2013
$465.00