Valid

GB/T 41037-2021Assurance requirements for system in package for space applications (English PDF)

宇航用系统级封装(SiP)保证要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41037-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 41037-2021 is the English-translated version of 宇航用系统级封装(SiP)保证要求.

GB/T 41037-2021 sets the assurance requirements for system-in-package (SiP) devices used in space applications.

It covers the basic requirements and the overall assurance process, then process capability assurance - how a SiP manufacturer defines its process capability domain and boundaries, evaluates it with test vehicles and has it approved and maintained - and device assurance, from requirements analysis and design assurance to evaluation and verification, identification and quality assurance of installed products, ending with the assurance results.

Annexes describe the capability domains, the evaluation test vehicles and the reporting of the tests. It applies to hermetic SiP devices with complex functional structures, while heterogeneous devices integrating optoelectronics or micro-electromechanical systems can use it as a reference. It was issued on 31 December 2021 and has applied since 1 July 2022.

Found what you need?

Document preview — GB/T 41037-2021

National Standard of the People's Republic of China

ICS: 49.060
Classification: V 25

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
3.2 Abbreviations
4 Basic requirements
5 SiP Assurance Process
6 SiP Process Capability Guarantee
6.1 SiP Process Capability Recognition
6.2 Maintenance of SiP Process Capability
7 SiP Device Guarantee
7.1 Requirements Analysis
7.2 Design Assurance
7.3 Evaluation and Verification
7.4 Identification
7.5 Quality Assurance of Installed Products
8 Guaranteed results
Appendix A (Informative) SiP Process Capability Domain Definition
Appendix B (Informative) SiP Process Capability Area Evaluation Test Vehicle (TVCE)
Appendix C (normative) SiP Process Capability Area Assessment Test Implementation and Reporting Requirements
Appendix D (Informative) SiP Process Capability Area Approval Test

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the basic requirements, assurance process, process capability assurance, device assurance, assurance of system-in-package (SiP) assurance for aerospace applications related requirements for results.

This document applies to the assurance work of hermetic SiP devices with complex functional structures. Others integrate optoelectronics, micro-electromechanical systems, etc. The SiP device with heterostructure is used for reference.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 4589.1-2006 Semiconductor Devices Part 10. General Specification for Discrete Devices and Integrated Circuits

GB/T 7826 System Reliability Analysis Technique Failure Mode and Effects Analysis (FMEA) Procedure

GB/T 7829 Fault Tree Analysis Program

GB/T 25000.1 System and Software Engineering System and Software Quality Requirements and Evaluation (SQuaRE) Part 1. SQuaRE Guidelines

GB/T 28172 Embedded Software Quality Assurance Requirements

GB/T 29074 Requirements for the identification of aerospace components

3 Terms, Definitions and Abbreviations

3.1 Terms and Definitions

The terms and definitions defined in GB/T 29074 and GB/T 25000.1 and the following terms and definitions apply to this document.

3.1.1 System-in-package; SiP

Provides a collection of different functional components that relate to a system or subsystem function and are assembled in a unit.

Note: A SiP can optionally contain passive components, microelectromechanical systems (MEMS), optical components, other packages and devices.

3.1.2 Process capability domain and its boundaries

The production line elements within a certain range determined by the SiP production plant are solidified by the Process Validation Document (PID) and passed through the specified process performance.

The scope of the process technology determined by the force approval process.

Note: The process technology category should have clear and quantifiable evaluation boundaries.

3.1.3 Process capability evaluation

The SiP manufacturer formulates an evaluation test program for the determined process capability domain and its boundaries, adopts the test carrier, and conducts tests according to the specified requirements.

The evaluation test is carried out, and the general name of the evaluation conclusion is given.

3.1.4 Process capability approval

For the production line, it is characterized by the process characteristics of the products produced by the production line.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 32307-2024|GB/T 43221-2023|GB/T 41041-2021|GB/T 32304-2015|GB/T 45570-2025|GB/T 45571-2025

How to Download GB/T 41037-2021

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.