GB/T 30094-2013Technical specification for industrial Ethernet switchs (English PDF)
工业以太网交换机技术规范
This is a limited preview
Buy now to download the full PDF (66 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30094-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 17, 2013
Implementation date
May 1, 2014
Scope
GB/T 30094-2013 is the English-translated version of 工业以太网交换机技术规范.
GB/T 30094-2013 is the Chinese standard "Technical specification for industrial Ethernet switchs". Its scope clause reads: This standard specifies the terms, definitions, technical requirements, test methods and inspection rules of industrial Ethernet switches.
This standard applies to work in GB/T 9387.1-1998 prescribed OSI Basic Reference Model Layer 1 to 2 or 1 ~ 3 layer and physical layer compliance with IEEE802.3.2008 standard, in line with the data link layer IEEE802.1D.2004 and GB/T 15629.2- 2008 standard, in line with the network layer protocol stack specification IETFIP industrial Ethernet switches.
Found what you need?
Document preview — GB/T 30094-2013
National Standard of the People's Republic of China
- ICS
- 25.040
- Classification
- N 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Acronyms
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 industrial environmental adaptability requirements
- 4.1 Overview
- 4.2 Climate
- 4.3 Electromagnetic Compatibility
- 4.4 insulation
- 4.5 mechanical aptitude
- 4.6 External power supply
- 4.7 Enclosure protection
- 5 Functional requirements
- 5.2 interface function
- 5.3 security features
- 5.4 redundant and self-healing function
- 5.5 management function
- 6 performance requirements
- 6.1 Credibility Indicators
- 6.2 real-time forwarding performance
- 6.3 Interface Performance
- 6.4 Network self-healing properties
- 6.5 Exact network clock performance
- 7 28 Other Requirements
- 7.1 Power
- 7.2 Grounding
- 7.3 wiring device
- 7.4 Basic Indicators
- 7.5 Cooling
- 7.6 markings, and the appearance of
- 7.7 29 random file
- 7.8 Packaging
- 7.9 Storage
- 8 30 Test Method
- 8.1 Overview
- 8.2 Test conditions and configuration
- 8.3 Environmental Adaptability Test
- 8.4 Functional Test
- 8.5 Performance Test
- 9 inspection rules
- 9.1 Type inspection
- 9.2 factory inspection (factory acceptance test)
- Appendix A (informative) test instrumentation requirements
- Annex B (informative) Typical networking model
- Annex C (informative) Reliability Verification Test
- References
- 10 Table 4 Salt
1 Scope
This standard specifies the terms, definitions, technical requirements, test methods and inspection rules of industrial Ethernet switches.
This standard applies to work in GB/T 9387.1-1998 prescribed OSI Basic Reference Model Layer 1 to 2 or 1 ~
3 layer and physical layer compliance with IEEE802.3.2008 standard, in line with the data link layer IEEE802.1D.2004 and GB/T 15629.2-
2008 standard, in line with the network layer protocol stack specification IETFIP industrial Ethernet switches.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test A. Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test B. Dry heat
GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat test (12h 12h cycle)
GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock
GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods - Test Ed. Free fall
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Fc. Vibration (sinusoidal)
GB/T 2423.16-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test J and guidance. Mould growth
GB/T 2423.18-2012 Environmental testing Part 2. Test methods - Test Kb. Salt mist, cyclic (sodium chloride solution)
GB/T 2423.21-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test M. Low air pressure
GB/T 2423.22-2012 Environmental testing - Part 2. Test methods - Test N. Temperature change
GB/T 2423.51-2012 Environmental testing - Part 2. Test methods - Test Ke. Flowing mixed gas corrosion test
GB 2894-2008 Guidelines for the use and safety signs
GB 4208-2008 shell protection (IP code)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB 4943.1-2011 Safety of information technology equipment - Part 1. General requirements
Limits and methods of measurement of radio disturbance of information technology equipment GB 9254-2008
GB/T 9387.1-1998 Information technology - Open Systems Interconnection - Basic Reference Model - Part 1. Basic Model
GB/T 13384-2008 mechanical and electrical products packaging General technical conditions
GB/T 13729-2002 remote terminal device
GB/T 14048.7-2006 Low-voltage switchgear and control equipment - Part 7-1. Ancillary Terminal blocks for copper conductors
GB/T 14598.3-2006 Electrical relays - Part 5. Measuring relays and protection equipment insulation coordination requirements and tests
GB/T 15153.1-1998 Telecontrol equipment and systems Part 2. Operating conditions Section 1 Power supply and electromagnetic compatibility
GB/T 15153.2-2000 Telecontrol equipment and systems Part 2. Operating conditions Section 2 Environmental conditions (climatic, mechanical and
Other non-electrical influences)
Between GB/T 15629.2-2008 Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks Specific requirements […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 66 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 45906.10-2025Substation secondary system - Part 10: Test and detection
- GB/T 42090-2022Intelligent feed processing mills—Technical specification for data acquisition
- GB/T 42149-2022Railway application—Fixed installations—Technical specification for current protection of medium voltage power supply system based on digital communication
- JY/T 0597-2017Equipment specifications for the major of agricultural equipment application technology in vocational colleges
Similar standards
How to Download GB/T 30094-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 30094-2013
$1,100.00