GB/T 42090-2022Intelligent feed processing mills—Technical specification for data acquisition (English PDF)
智能化饲料加工厂 数据采集技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42090-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2022
Implementation date
July 1, 2023
Scope
GB/T 42090-2022 is the English-translated version of 智能化饲料加工厂 数据采集技术规范.
GB/T 42090-2022 states how data are to be collected in an intelligent feed processing plant.
Its contents list covers the composition and network structure of the acquisition system, the hardware and software requirements, the scope of the data to be collected, the collection methods, the technical requirements, data storage and security requirements.
Clause 3 defines the data acquisition system as one that gathers data through sensors and interfaces and then analyses, stores, converts and transmits them with network and computer technology.
Among the standards it quotes are GB/T 15969.1 for programmable logic controllers, GB/T 30094 for industrial Ethernet switches, GB/T 30121 for platinum resistance thermometers, GB/T 22239 for network security and JJF 1834 for non-automatic weighing instruments. Issued on 30 December 2022, it has applied since 1 July 2023.
Found what you need?
Document preview — GB/T 42090-2022
National Standard of the People's Republic of China
- ICS
- 65.060
- Classification
- B 93
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 Composition and network structure
- 6 Hardware Requirements
- 7 Software Requirements
- 8 Data acquisition scope
- 9 Data collection method
- 10 Technical requirements
- 11 Data Storage
- 12 Safety Requirements
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
1 Scope
This document specifies the abbreviations, composition and network structure, hardware requirements, software requirements, data acquisition Collection scope, data collection methods, technical requirements, data storage and security requirements.
This document is applicable to the data collection of intelligent feed processing plants.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 5226.1 Safety of machinery and electrical machinery and electrical equipment - Part 1: General technical requirements
GB/T 15969.1 Programmable Logic Controller Part 1: General Information
GB 17167 General rules for equipment and management of energy measuring instruments for energy-consuming units
GB/T 18823 Permissible Errors in Judgment of Feed Test Results
GB/T 22239 Basic Requirements for Network Security Level Protection of Information Security Technology
GB/T 30094 Technical Specifications for Industrial Ethernet Switches
GB/T 30121 Industrial platinum thermal resistance and platinum temperature sensing element
GB/T 38868 General Technical Requirements for Industrial Control Networks Wired Networks
GB 50311 Code for Engineering Design of Integrated Cabling System
JJF1834 General technical requirements for non-automatic weighing instruments
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 intelligent feed processing plant
Based on Internet of Things, Internet, artificial intelligence and other technologies, it can realize production automation and informatization, and provide decision-making for production and business activities. Supported feed mills.
3.2 data acquisition system
A system that collects data based on sensor and interface technology, and uses network and computer technology for analysis, storage, conversion and transmission.
4 Abbreviations
The following abbreviations apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5226.1Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB/T 15969.1Programmable controllers -- Part 1: General information
- GB 17167General rules for energy measuring instrument equipping and managing of energy user
- GB/T 18823Permitted tolerants for judgment of testing results in feeds
- GB/T 22239Information security technology - Baseline for classified protection of cybersecurity
- GB/T 30094Technical specification for industrial Ethernet switchs
Similar standards
How to Download GB/T 42090-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17167-2025 — General rules for energy measuring instrument equipping and managing of energy user
GB 50311-2016 — Code for engineering design of generic cabling system
GB/T 15969.1-2007 — Programmable controllers -- Part 1: General information
Secure payment via Stripe
Payments accepted
GB/T 42090-2022
$105.00