GB/T 30011-2013Measure method for new energy using rate on ship - The ship with gas/oil mixed fuel engine (English PDF)
船舶新能源使用比例测定方法 天然气/燃油混合燃料动力船舶
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30011-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 10, 2013
Implementation date
November 1, 2013
Scope
GB/T 30011-2013 is the English-translated version of 船舶新能源使用比例测定方法 天然气/燃油混合燃料动力船舶.
GB/T 30011-2013 is the Chinese standard "Measure method for new energy using rate on ship - The ship with gas/oil mixed fuel engine". Its scope clause reads: This standard specifies the determination and calculation of the proportion of natural gas in total energy use in the ship's.
This standard applies to testing and calculation of gas/fuel mixture of fuel usage of natural gas in power the ship main engine and boiler Ship proportion of total energy use.
NOTE. The standard natural gas referred to as liquefied natural gas (LNG) and compressed natural gas (CNG). Its clauses include ship calculate the proportion of natural gas use.
Found what you need?
Document preview — GB/T 30011-2013
National Standard of the People's Republic of China
- ICS
- 47.020.01
- Classification
- U 10
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Ship calculate the proportion of natural gas use
- 3.1 Passenger Ship
1 Scope
This standard specifies the determination and calculation of the proportion of natural gas in total energy use in the ship's.
This standard applies to testing and calculation of gas/fuel mixture of fuel usage of natural gas in power the ship main engine and boiler
Ship proportion of total energy use.
NOTE. The standard natural gas referred to as liquefied natural gas (LNG) and compressed natural gas (CNG).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Steady-state test cycles for different engine applications. GB/T 8190.4-2010 Reciprocating internal combustion engines - Exhaust emission measurement - Part 4
GB/T 11062 natural gas calorific value, density, relative density and Wobbe index calculation method
CB/T 3254.2-1994 marine diesel engine test bench method
CB/T 3254.3-1994 marine diesel engine test bench measurements
CB/T 4147 marine diesel engine fuel consumption rate for
ISO 8217.2012 Petroleum products fuel oil (F grade) marine fuel specification (Petroleumproduct-Fuels (class
F) -Specificationsofmarinefuels)
3 Ship calculate the proportion of natural gas use
3.1 Passenger Ship
The proportion of natural gas in accordance with the use of passenger main engine and boiler use accounts for a ship's total energy usage into the proportion
Line basis, according to the equation (1) and (2) calculate the proportion of natural gas use passenger ships.
Note. The total amount of energy use herein include only ship main engine (prime mover) and energy consumption of the boiler, without other equipment energy consumption. If the auxiliary
Using the host shaft form, its energy consumption is not included in the ship's total energy usage.
R1 = sigma m1
RME (i) × PME (i) × SFCME (i) × HME (i) P
S1
RAE (j) × PAE (J) × SFCAE (j) × HAE (j)
S1
CBO (k) × FCBO (k) × HBO (k) P
S1 (1)
PS1 = sigma m1
PME (i) × SFCME (i) × HME (i) sigma
PAE (j) × SFCAE (j) × HAE (j)
FCBO (k) × HBO (k) (2)
Where.
R1 --- passenger ships used in a proportion of natural gas;
m1 --- passenger ships, the number of hosts;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30011-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30011-2013
$125.00