Valid

GB/T 29856-2013Characterization of semiconducting single-walled carbon nanotubes using near infrared photoluminescence spectroscopy (English PDF)

半导体性单壁碳纳米管的近红外光致发光光谱表征方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29856-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 12, 2013

Implementation date

April 15, 2014

Scope

GB/T 29856-2013 is the English-translated version of 半导体性单壁碳纳米管的近红外光致发光光谱表征方法.

GB/T 29856-2013 is the Chinese standard "Characterization of semiconducting single-walled carbon nanotubes using near infrared photoluminescence spectroscopy".

Its scope clause reads: This standard provides the basis for near-infrared photoluminescence spectrum to characterize the principles of semiconducting single-walled carbon nanotubes, the use of standardized Instruments, sample preparation methods, measurement procedures, data processing and results analysis, uncertainty factors affect the content analysis and test reports.

This standard applies to the use of near-infrared photoluminescence spectra were characterized semiconducting SWNT chirality index and relative mass concentrations. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 29856-2013

National Standard of the People's Republic of China

ICS
71.060.99
Classification
G 12

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle
  • 4.1 Structure SWNTs
  • 4.2 band structure and photoluminescence peak
  • 5 3 Instrument
  • 5.1 Near-infrared photoluminescence spectroscopy
  • 5.2 light source
  • 6 sample preparation method
  • 7 Measurement
  • 8 data processing and results analysis
  • 8.1 Samples semiconducting SWNT chirality indices identified
  • 9 Uncertainty Factors Analysis
  • 10 Test Report
  • Appendix A (informative) near infrared semiconducting SWNT photoluminescence spectroscopy

1 Scope

This standard provides the basis for near-infrared photoluminescence spectrum to characterize the principles of semiconducting single-walled carbon nanotubes, the use of standardized

Instruments, sample preparation methods, measurement procedures, data processing and results analysis, uncertainty factors affect the content analysis and test reports.

This standard applies to the use of near-infrared photoluminescence spectra were characterized semiconducting SWNT chirality index and relative mass concentrations.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 13966 Analytical Instruments terms

GB/T 19619 nanomaterials term

ISO TS80004-4 nanotechnology terminology and definitions - Part 4. carbon nanomaterials (Nanotechnologies-Terminol- ogyanddefinitions-Part 4. Carbonnano-objects)

3 Terms and Definitions

GB/T 13966, GB/T 19619 and ISO TS80004-4 define the following terms and definitions apply to this document.

3.1 SWNT chirality

Vector symbols used to describe the structure of single-walled carbon nanotubes.

3.2 Chiral index

Description SWNT chiral vector of two integers.

3.3 Relative mass concentration

Some chiral SWNTs with respect to the mass ratio of all detected semiconducting single-walled carbon nanotubes.

Principle 4

This method determines the chiral index of the carbon tubes based on SWNT photoluminescence position, according to the photoluminescent product SWNTs

Strength points and known photoluminescent sectional estimates of relative quality SWNT samples of various semiconducting SWNTs composition concentration.

4.1 Structure SWNTs

Single-walled carbon nanotubes can be regarded as a single layer of graphite from the crimped cylindrical structure. Single-walled carbon nanotubes by the specific geometry of chiral

To define the vector Ch, Ch = na1 ma2, where a1 and a2-based vectors (see Figure 1), can also be defined by a chiral index (n, m).

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 29856-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 29856-2013

$255.00