GB/T 29850-2013Test method for measuring compensation degree of silicon materials used for photovoltaic applications (English PDF)
光伏电池用硅材料补偿度测量方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29850-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
April 15, 2014
Scope
GB/T 29850-2013 is the English-translated version of 光伏电池用硅材料补偿度测量方法.
GB/T 29850-2013 is the Chinese standard "Test method for measuring compensation degree of silicon materials used for photovoltaic applications". Its scope clause reads: This standard specifies the method for measurement and analysis of silicon photovoltaic material compensation degree.
This standard applies to photovoltaic cells with a non-doped silicon material to measure and analyze the degree of compensation. Its clauses include terms and definitions; principle of the method.
Found what you need?
Document preview — GB/T 29850-2013
National Standard of the People's Republic of China
- ICS
- 29.045
- Classification
- H 82
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 principle of the method
1 Scope
This standard specifies the method for measurement and analysis of silicon photovoltaic material compensation degree.
This standard applies to photovoltaic cells with a non-doped silicon material to measure and analyze the degree of compensation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4326 extrinsic semiconductor single crystals Hall mobility and Hall coefficient measurements
GB/T 14264 semiconductor material terms
Measurement Silicon Crystal III GB/T 24581 cryogenic Fourier transform infrared spectroscopy, test methods V family impurities
GB/T 29057 by zone melting crystal pulling polycrystalline silicon rod and spectroscopy evaluation procedures
3 Terms and Definitions
Terms and definitions GB/T 14264 apply to this document defined.
4 principle of the method
The use of the carrier concentration and temperature variation of electrical neutrality equation, n (P) -Tl curve fitting analysis by computer, thus
To obtain the degree of compensation. Neutral equation (N type in a sample, for example) as shown in Formula (1).
n (n NA)
ND-NA-n =
NC gA
· Exp (-Ej/kT) (1)
Where NC is calculated, see formula (2).
NC = 2
2pim * akT (2)
Ionized impurity concentration dependence see equation (3).
n300 = ND-NA (3)
By the formula (1), (2), (3) using the principle of least squares, and appropriate adjustments gA, m * a, ND, NA, Ej5 quantities for data fitting to give
The degree of compensation to see the expression of formula (4), (5).
Kp = ND/NA (P) type (4)
KN = NA/ND (N) type (5)
According to GB/T 4326, the samples undergo a variable temperature Hall measurements, test data calculated by the formula (6) to give nT-1 curve.
n = gamma/e · Reta (6)
Formula (1) to (6).
N --- carrier concentration, units per cubic centimeter (cm-3);
NA --- acceptor impurity concentration, atoms · cm-3;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29850-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29850-2013
$105.00