GB/T 29844-2013Specifications of metrology patterns for the evaluation of advanced photolithgraphy (English PDF)
用于先进集成电路光刻工艺综合评估的图形规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29844-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
April 15, 2014
Scope
GB/T 29844-2013 is the English-translated version of 用于先进集成电路光刻工艺综合评估的图形规范.
GB/T 29844-2013 is the Chinese standard "Specifications of metrology patterns for the evaluation of advanced photolithgraphy".
Its scope clause reads: This standard specifies the form of integrated circuits for advanced lithography process a comprehensive assessment of the standard test pattern units, general size, as well as push Recommended layout and design rules, these standards include test patterns for optical microscopy and scanning electron microscopy with a variety of graphical elements.
Technology, conventional reticle, photoresist and lithography characteristics and the capacity of the standard of review applicable to integrated circuits and alternating phase shift Phase measurement reticle for the g-line, i-ray, KrF, ArF, etc. of the lithographic apparatus and the corresponding wavelength photolithography process. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29844-2013
National Standard of the People's Republic of China
- ICS
- 31.030
- Classification
- L 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Mask error factor maskerrorfactor; MEF
- 3.2 Phase shift reticle phaseshiftmask
- 3.3 Off-axis illumination
- 3.4 Light acid molecule effective diffusion length
- 3.5 Alternating phase shift mask
1 Scope
This standard specifies the form of integrated circuits for advanced lithography process a comprehensive assessment of the standard test pattern units, general size, as well as push
Recommended layout and design rules, these standards include test patterns for optical microscopy and scanning electron microscopy with a variety of graphical elements.
Technology, conventional reticle, photoresist and lithography characteristics and the capacity of the standard of review applicable to integrated circuits and alternating phase shift
Phase measurement reticle for the g-line, i-ray, KrF, ArF, etc. of the lithographic apparatus and the corresponding wavelength photolithography process.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 16878-1997 Specification for detecting the graphics unit integrated circuit manufacturing technology
SJ/T 10584-1994 microelectronics photomask technical terms
3 Terms and Definitions
GB/T 16878-1997 and SJ/T 10584-1994 define the following terms and definitions apply to this document.
3.1 Mask error factor maskerrorfactor; MEF
When the graphic reticle is transferred onto a silicon wafer, the silicon graphics linewidth partial derivatives of the reticle linewidth.
NOTE. Factors Affecting mask error factor of the exposure conditions, the performance of the photoresist, lithography lens aberrations, after baking temperature. Much larger than the wavelength of the exposure in FIG.
Shaped mask error factor is usually very close to 1. Close to or smaller than the wavelength of the pattern, mask error factor will increase significantly. The alternating
Phase-shift lithography reticle lines can produce significantly smaller than 1 mask error factor. In the optical proximity effect correction in the fine structure of the compensation will be near
Significantly less than one.
3.2 Phase shift reticle phaseshiftmask
Produced in different regions of the photomask specific optical thickness, so that the light phase difference through different regions in order to achieve greater
Image contrast and the lithographic process window of the reticle.
3.3 Off-axis illumination
To further enhance the resolution of the lithographic projection lithography machine, so that the illumination beam to deviate from the direction of the lens axis of symmetry oblique incident illumination method.
3.4 Light acid molecule effective diffusion length
Chemically amplified photoresist after the exposure of the baked PSII acid molecules randomly diffuse the photoresist polymers formed expanded
Powder length.
3.5 Alternating phase shift mask
By a conventional light transmission area and enables light to produce a 180 ° phase shift of the phase shifter quartz zones alternately arranged phase-shifting mask, also known Levenson […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29844-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29844-2013
$185.00