GB/T 29842-2013Temporal systems for satellite navigation and positioning (English PDF)
卫星导航定位系统的时间系统
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29842-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 12, 2013
Implementation date
May 1, 2014
Scope
GB/T 29842-2013 is the English-translated version of 卫星导航定位系统的时间系统.
GB/T 29842-2013 is the Chinese standard "Temporal systems for satellite navigation and positioning".
Its scope clause reads: This standard specifies the satellite navigation and positioning system time-related terms and definitions, labeling methods, and the system is built Li, the system time conversion methods and applications of the main technical methods.
This standard applies to the use of satellite navigation and positioning system with time-dependent navigation, positioning, timing, time synchronization and other fields of scientific research, Teaching and application. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 29842-2013
National Standard of the People's Republic of China
- ICS
- 33.200
- Classification
- M 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Terms and definitions
- 3 Acronyms
- 4 Time System
- 4.1 satellite navigation and positioning system system time
- 4.2 major international universal time scale
- 4.3 satellite navigation system in the time scale
- 5 different time source and measuring the time difference in terms of
- 5.1 Time Source
- 5.2 Time Count
- 5.3 Time Difference
- 6.1 The main terms of time scales between
- 6.2 TAI, in terms of the system 10 UTC time different between the satellite navigation system
- 7 timing applications in major amendments
- 7.1 Basic Fixes
- 7.2 Fine amendment
- 7.3 pairs of accuracy is particularly required users afterwards amendment
- Appendix C (Informative Appendix) GPS Timing principle and error analysis
- Appendix D (Informative Appendix) GLONASS timing of principle
- Annex E (informative) Beidou satellite navigation experimental system, method and timing system time
- Annex F (informative) Precision Time delivery methods
- Annex G (informative) Standard Time Application Method
- References
1 Scope
This standard specifies the satellite navigation and positioning system time-related terms and definitions, labeling methods, and the system is built
Li, the system time conversion methods and applications of the main technical methods.
This standard applies to the use of satellite navigation and positioning system with time-dependent navigation, positioning, timing, time synchronization and other fields of scientific research,
Teaching and application.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
Evaluation of the time scale or time than the amount of technical performance characterization
2.1.1 Accuracy
In line with the degree of measured value and its true value. Accuracy is generally the total value of the uncertainty of measurement to characterize.
[ITU-RTF.862 recommendations]
2.1.2 Allan variance Alanvariance
AVAR Allan deviation Alandeviation
ADEV Normative short and long term frequency stability in the time domain or oscillator used to characterize the time scale, AVAR also known as "double sampling
Variance ".AVAR is ADEV squared.
[ITU-RTF.862 recommendations]
2.1.3 Fixed ADEV modifiedAlanvariance
MVAR And Allan variance is basically the same, but it can clearly distinguish between white noise and phase modulation phase modulation oscillator flicker noise.
[ITU-precision frequency and time on selected articles System Manual, 1997].
2.1.4 Phase
The measured value of the fractional part of a duplication of the period, which is measured relative to a recognizable feature of the phenomenon itself and into
Row.
Note. The time difference is a phase in the standard frequency and time signal service in the field of major concern, for example, two phases of the same phenomenon can be identified or not two
The time difference between the phases of the same phenomenon.
2.1.5 Phase deviation
With respect to a reference time signal phase.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29842-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29842-2013
$475.00